Banner Engineering Mini-Beam® SM2A31R Receiver, Rectangle Shape, 3000 mm Sensing, Infrared Sensing Beam
Photoelectric Receivers
13469
MFG #: SM2A31R
Banner®
161.63000
/ ea
- Application: For Use With SMA31 Series Photoelectric Sensor Emitter
- Catalog Number: SM2A31R
- Connection: 2 MR Cable
- Country of Origin: US
- Enclosure: IEC IP67 NEMA 1, 2, 3, 3S, 4, 4X, 12 and 13 Thermoplastic Reinforced VALOX
- Environmental Conditions: 90 PCT At 50 ° C Relative Humidity
- Gross Weight Per Pack: 0.3360 lb
- Leakage Current: Off-State Output: Less Than 1.7 MILAMP
- Lens: Acrylic
- Operating Temperature: -20 To 70
- Response Time: 2 ms On/1 ms Off
- Sensing Beam: 880 NMTR Infrared LED
- Sensing Range: 3
- Size: 65.8 MM Length X 12 MM Width X 33.3 MM Height X 18 MM Barrel Diameter
- Standards: CE Marked, CSA Approval, UL Approval
- Type: Opposed Mode Receiver
- UNSPSC: 39121528
- UPC 11: 66248826060
- UPC 12: 66248826060
- Voltage Rating: 24 - 240 V
- Stock Status: NONSTOCK
- Brand: Banner®
- Manufacturer: Banner Engineering Corp.
Banner Engineering Mini-Beam® Receiver, Rectangle, Opposed Sensing Method, 3000 mm Sensing Range, Infrared Sensing Beam, 2 ms On/1 ms Off Response, Solid State AC Switch Output, 24 to 240 VAC, Cable, LED Light Source, NEMA 1/2/3/3S/4/4X/6/12/13/IP67, -20 to 70 deg C Operating, Environmental Conditions: 90% at 50 deg C Relative Humidity
- Applications
- Features
| For Use With SMA31 Series Photoelectric Sensor Emitter |
| Rectangular with M18 barrel housing style; Compact, self-contained, modulated, highly repeatable sensors; Switch-selectable for light operate or dark operate; Physically and electrically interchangeable with 18 MM barrel-type photoelectric; Rugged, epoxy-encapsulated, totally encapsulated, O-ring sealing and stainless steel screws construction; Protected against transient voltages and against false pulse on power-up; Controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cover; MINI-BEAMs may be destroyed from overload conditions; Use on low voltage requires careful analysis of the load to determine if the leakage current or on-state voltage of the sensor will interfere with proper operation of the load; The false-pulse protection feature may cause momentary drop-out of the load when the sensor is wired in series or paral |
| Thermoplastic primary housing material |
| Light/dark operate |
| 300 us repeatability |
| Acrylic lens material |
| Potentiometer adjustment |
| 18 mm barrel diameter |
| Opposed mode receiver |
| Solid state AC switch input/output |
| 300 ms delay at power-up |
| 2 m cable connection |
| Rectangular with M18 mount |
| 2 m length cable connection |