Banner Engineering SI-QS75MC Interlock Switch Kit, 24/230 VAC, 10 A

Interlock Switches - Mechanical
64555 MFG #: SI-QS75MC
BANNER®
74.95000 / ea
Banner_SI_QS75MC
  • Actuator: SI-QS-SSA-4 In-Line Stamped
  • Catalog Number: SI-QS75MC
  • Connection: 1/2 IN NPT
  • Contact Configuration: 1 NC
  • Contact Rating: 10 AMP At 24 VAC, 10 AMP At 110 VAC, 6 AMP At 230 VAC, 6 AMP At 24 VDC A
  • Country of Origin: USA
  • Enclosure: IEC IP65
  • Frequency Rating: 40-60 Hz
  • Gross Weight Per Pack: 1 lb
  • Material: Glass Fiber-Reinforced Polymide Thermoplastic Housing, Silver-Nickel Alloy Contact
  • Operating Temperature: -30 To 80
  • Size: 75 MM Height X 52 MM Width X 33 MM Depth Hz
  • Standards: RoHS Compliant
  • Type: Machine Safety Switch Kit
  • UNSPSC: 39122205
  • UPC 11: 66248846700
  • UPC 12: 66248846700
  • Stock Status: NONSTOCK
  • Brand: BANNER®
  • Manufacturer: Banner Engineering Corp.
  • Amperage Rating: 10 A
  • Voltage Rating: 24/110/230 V
Banner Engineering Interlock Switch Kit, 24/230 VAC, 10 A, IP65, Thermoplastic, 75 mm H x 52 mm W x 33 mm D
QTY
Add to Wishlist
  • Features
Positive opening safety contacts (IEC 60947-5-1) (not dependent upon springs); Mechanically coded actuators use two independent operating elements to minimize intentional tampering or defeat; Rotating head allows actuator engagement from front or back or either of two top positions; Insulated device (IEC 60947-5-1) on all models with plastic housings; Short circuit protection: 6 AMP slow blow, 10 AMP fast blow, recommended external fusing or overload protection; Cable entry: M16 x 1.5 threaded entrance; Wire connections: for switches with one or two contacts: stranded and solid - 20 - 16 AWG for one wire; Stranded: 20 - 18 AWG for two wires
Positive opening safety contacts (IEC 60947-5-1) (not dependent upon springs)
Mechanically coded actuators use two independent operating elements to minimize intentional tampering or defeat
Rotating head allows actuator engagement from front or back or either of two top positions
Choice of four standard actuators, special high extraction force actuator is available as option
IEC IP65 switch housing rating may be increased to IEC IP67 with addition of screw to wiring chamber door
Insulated device (IEC 60947-5-1) on all models with plastic housings
6 A slow blow, 10 A fast blow short circuit protection, recommended external fusing or overload protection
Glass fiber-reinforced polymide thermoplastic housing, silver-nickel alloy contact
10 A at 24 VAC, 10 A at 110 VAC, 6 AMP At 230 VAC, 6 AMP At 24 VDC
-30 to 80 deg C Operating
1 NC contact configuration
SI-QS-SSA-4 In-line stamped actuator
1000000 operating cycles
1/2 in NPT connection