Banner Engineering SI-HG80DQD Interlock Switch, 250 VAC, 3 A, 1 Pole

Interlock Switches - Mechanical
59338 MFG #: SI-HG80DQD
BANNER®
204.25000 / ea
Banner_SI_HG80DQD
  • Catalog Number: SI-HG80DQD
  • Country of Origin: USA
  • Dimensions: 97 mm H x 72 mm W x 19 mm D
  • Enclosure Type: NEMA 4/IP67
  • Gross Weight Per Pack: 1 lb
  • Material: Zinc
  • Standards: cCSAus, CE Marked, RoHS Compliant
  • UNSPSC: 39122205
  • UPC 11: 66248846731
  • UPC 12: 66248846731
  • Stock Status: NORMALLY STOCKED
  • Brand: BANNER®
  • Manufacturer: Banner Engineering Corp.
  • Amperage Rating: 3 A
  • Voltage Rating: 250 VAC
  • Number Of Poles: 1
Banner Engineering Interlock Switch, 250 VAC, 3 A, 1 Pole, NEMA 4/IP67, Zinc, 97 mm H x 72 mm W x 19 mm D
QTY
Add to Wishlist
  • Features
Safety switch is integrated and encapsulated into a load-bearing hinge, providing a high degree of protection from intentional defeat; Identical in appearance to non-switching blank hinge; Switch components concealed inside the hinge are protected from mechanical impact, providing superior performance to actuator-activated safety switches, rated IEC IP67; Hinge operates to a full 180 ° range of motion, safety switching point (guard-closed position) is adjustable over the full 0 - 180 ° operating range; Robust zinc die-cast housing is corrosion resistant; Short circuit protection: 6 AMP slow blow, 10 AMP fast blow, recommended external fusing or overload protection
Safety switch is integrated and encapsulated into a load-bearing hinge, providing a high degree of protection from intentional defeat
Identical in appearance to non-switching blank hinge
Switch components concealed inside the hinge are protected from mechanical impact, providing superior performance to actuator-activated safety switches, rated IEC IP67
Hinge operates to a full 180 deg range of motion, safety switching point (guard-closed position) is adjustable over the full 0 - 180 deg operating range
When properly interfaced or used with an appropriate controller, two SI-HG80D..switches can achieve safety category 4, per ISO 13849 (EN 954-1)
Robust zinc die-cast housing is corrosion resistant
6 A slow blow, 10 A fast blow short circuit protection, recommended external fusing or overload protection
Zinc die-cast
3 A at 250 VAC maximum, 0.5 A at 60 VDC maximum
-25 to 70 deg C Operating
1 NO, 1 NC auxiliary contact configuration
Flat actuator
1000000 operating cycles
4 pin micro-style quick disconnect connection
With Load bearing hinge