Banner Engineering ES-FA-6G ES Series Emergency Stop Safety Module, 3NO-1NC Contact Form
Safety Relays
59241
MFG #: ES-FA-6G
BANNER®
222.05000
/ ea
- Catalog Number: ES-FA-6G
- Country of Origin: USA
- Dimensions: 84 mm H x 22.5 mm W x 118 mm D
- Enclosure Type: NEMA 1/IP20
- Frequency Rating: 50/60 Hz
- Gross Weight Per Pack: 1 lb
- Mounting Type: DIN Rail
- Power Rating: 2 W
- Series: ES Series
- Standards: CE Marked, CSA Certified, UL Listed
- Temperature Rating: 0 to 50 °C
- Terminal Type: Fixed
- UNSPSC: 32151802
- UPC 11: 66248855579
- UPC 12: 66248855579
- Stock Status: NONSTOCK
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Contact Form: 3NO-1NC
Banner Engineering Emergency Stop Safety Module, Series: ES Series, 2 W, 50/60 Hz, 3NO-1NC, DIN Rail Mount, Fixed Terminal, NEMA 1/IP20, 0 to 50 deg C, 84 mm H x 22.5 mm W x 118 mm D
- bannerengineering.com(Seller Home Page URL)
- Full Eng Drawing URL - Banner_Engineering_GM_FA_10J_Full_Engineering_Drawing.pdf(Full Eng Drawing URL)
- Spec Sheet URL - SPE_55581.pdf(Spec Sheet URL)
- Tech Drawing URL - Banner_Engineering_ES_FA_6G_Technical_Drawing.pdf(Tech Drawing URL)
- Warranty URL - WAR_Banner_Warranty.pdf(Warranty URL)
- Features
| 0 |
| Polycarbonate primary housing |
| 20 to 30 mA at 13 to 27 VAC/VDC safety input - reset, 40 to 400 mA at 13 to 27 VAC/VDC safety input - single channel |
| AgSnO2 contacts |
| 100000 cycles at 1500 VA electrical life |
| 90% at 50 deg C relative humidity |
| Simultaneous or concurrent input operation |
| 3 NO (6 A); 1 NC non-safety (6 A) output configuration |
| 10000000 operations mechanical life |
| 35 ms response time |
| Transient voltage/reverse polarity supply protection |
| 24 VAC/VDC +/- 10% supply voltage |
| 10 to 55 Hz at 0.35 mm vibration |
| One 1-channel type input |
| 3 channel output |
| Monitors one single-channel normally closed emergency stop switch circuit for a contact failure or wiring fault |
| Three output switching channels for connection to control-reliable power interrupt circuits |
| Auto reset or manual reset |
| One auxiliary non-safety N/C output contact for status monitoring by process controller |
| For use in functional stop category 0 applications per NFPA 79 and EN418 |
| 6 amp safety output contacts |