Bussmann® JM60200-3CR 200 amp class J fu
Power Fuse Blocks
754831
MFG #: JM60200-3CR
Bussmann
809.28000
/ ea
- Alternate Catalog Number: JM60200-3CR
- Application: Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: JM60200-3CR
- Connection: Knife blade end x knife blade end
- Country of Origin: MX
- Currency: USD
- Dimensions: 7.3 in L x 7.9 in W x 3.8 in H
- EU RoHS Indicator: C
- Gross Weight Per Pack: 2.4200 lb
- Gross Weight per Pack Metric: 1.10
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8536308000
- Height: 3.76 in
- Height [Metric]: 9.5504 cm
- Length: 7.25 in
- Length [Metric]: 18.4150 cm
- Material: Thermoplastic
- Mounting Type: Hole
- Number Of Poles: 3
- Standard: Contact Manufacturer ,UL Listed ,CSA Certified,RoHS Compliant,CE Marked
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantUL File No. E14853Guide IZLT/IZLT7CSA File No. 47235, Class 6225-01CE Certified
- Sub Brand: Bussmann Series
- Suitable For Use With: Knife Blade Cartridge Fuse
- Temperature Rating: -40 to 120
- UNSPSC: 39121629
- UPC 11: 05171238741
- UPC 12: 051712387415
- Width: 6.25 in
- Width [Metric]: 15.8750 cm
- Stock Status: NORMALLY STOCKED
- Brand: Bussmann
- Manufacturer: Eaton
- Amperage Rating: 110-200A
- Class: J
- Type: Modular fuse block
- Voltage Rating: 600 V
- Wire Size: 1 to 3/0 AWG, 6 to 2 AWG, 1 AWG to 200 kcmil
Bussmann® series Ultimate protection LPJ Class J dual element, current-limiting, time delay fuses available with optional open fuse indication. time delay 10 seconds (minimum) at 500% of rated current.
- Applications
- Features
| Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs |
| CR |
| Integral dovetails allow snapping together multiple poles at point of use for greater application flexibility |
| Factory assembled two- and three pole configurations available |
| Up to four mounting holes per pole increase installation flexibility |
| Design meets UL creep and clearance requirements for industrial control circuits (UL 508 and UL 845) |
| 200 to 600 A blocks meet the higher UL creep and clearance requirements for industrial power distribution standards (UL 98, UL 69, UL 489, UL 891 and UL 869A) |
| Design meets UL creep and clearance requirements for Industrial Power Circuits |
| Blocks dovetail together to assemble required number of poles |
| (1) 6 AWG to 250 kcmil copper/aluminum, (1) 6 to 2 AWG copper/aluminum, (2) 6 to 2 AWG copper wire |
| Finger grips on cover for easy removal |
| 200 kA short circuit current rating |
| Tin-plated aluminum terminal |
| UL 94V0 Flammability rating |
| Built-in lockout/tagout feature improves safety |
| High-clarity see-through covers allow for inspecting wire terminations or thermography measurements without removing cover |