or to view stock quantity and your pricing.
Steiner serves territories in Northern Illinois, Northwest Indiana and Southern Wisconsin. Please for assistance if outside our sales territory.
B-Line
B-Line B3034-1/2 HDG Top Flange C-Clamp, 1/2-13 Rod, 810 lb Load, Malleable Steel, Hot Dipped Galvanized
Custom_Product_Images_Illustration
B-Line
B-Line B3034-1/2 HDG Top Flange C-Clamp, 1/2-13 Rod, 810 lb Load, Malleable Steel, Hot Dipped Galvanized
SKU167950
MFGR #B3034-1/2HDGW/ZN
Your Cost: $3.69/ea
List: B-Line is a leading manufacturer and fabricator of metal products used in the support of pipe hangers and support equipment for industrial, commercial, utility and HVACR applications. B-Line pipe hangers and supports includes a wide variety of support products such as beam clamps, pipe hangers, pipe clamps, pipe rollers, pipe supports, concrete inserts and brackets.
B-Line is a leading manufacturer and fabricator of metal products used in the support of pipe hangers and support equipment for industrial, commercial, utility and HVACR applications. B-Line pipe hangers and supports includes a wide variety of support products such as beam clamps, pipe hangers, pipe clamps, pipe rollers, pipe supports, concrete inserts and brackets.
Alternate Catalog Number 78101170550 Catalog Number B3034-1/2HDGW/ZN Country of Origin CN Currency USD Gross Weight Per Pack 0.6500 lb Returnable Y Series B3034 Standards ANSI/MSS SP-69/SP-58 Type 19/23cULus ListedFederal Specification WW-H-171E and A-A-1192A Type 19/23FM Approved Type Wedge UNSPSC 39121311 UPC 11 78101170550 UPC 12 78101170550 Stock Status NORMALLY STOCKED Brand B-Line Manufacturer Eaton Finish Hot Dipped Galvanized Flange Thickness 3/4 in Load Capacity 810 lb Material Cast Malleable Steel Rod Size 1/2-13 Includes Hardened Cup Point Setscrew and Jam Nut, Rod Size 1/2 in-13 TPI, Weight 47 Lb per 100 May be used on top or bottom flange of the beam Beveled lip allows hanging from top flange where clearance is limited May be installed with the set screw in the up or down position Offset design permits unlimited rod adjustment by allowing the rod to be threaded completely through the clamp The rear window design permits inspection of thread engagement Safety factor of 5 Hanger rod not included For hanging from steel beam where flange thickness does not exceed 3/4 in 1/2-13 x 1-1/2 in set screw, 8 in maximum iron pipe size, 11 ft/lb setscrew torque, 3/4 in throat opening
content loaded
content loaded
content loaded
content loaded
- Attributes
- Documents & Resources
- Features
- Substitute Products
| Alternate Catalog Number | 78101170550 |
| Catalog Number | B3034-1/2HDGW/ZN |
| Country of Origin | CN |
| Currency | USD |
| Gross Weight Per Pack | 0.6500 lb |
| Returnable | Y |
| Series | B3034 |
| Standards | ANSI/MSS SP-69/SP-58 Type 19/23cULus ListedFederal Specification WW-H-171E and A-A-1192A Type 19/23FM Approved |
| Type | Wedge |
| UNSPSC | 39121311 |
| UPC 11 | 78101170550 |
| UPC 12 | 78101170550 |
| Stock Status | NORMALLY STOCKED |
| Brand | B-Line |
| Manufacturer | Eaton |
| Finish | Hot Dipped Galvanized |
| Flange Thickness | 3/4 in |
| Load Capacity | 810 lb |
| Material | Cast Malleable Steel |
| Rod Size | 1/2-13 |
| Includes Hardened Cup Point Setscrew and Jam Nut, Rod Size 1/2 in-13 TPI, Weight 47 Lb per 100 |
| May be used on top or bottom flange of the beam |
| Beveled lip allows hanging from top flange where clearance is limited |
| May be installed with the set screw in the up or down position |
| Offset design permits unlimited rod adjustment by allowing the rod to be threaded completely through the clamp |
| The rear window design permits inspection of thread engagement |
| Safety factor of 5 |
| Hanger rod not included |
| For hanging from steel beam where flange thickness does not exceed 3/4 in |
| 1/2-13 x 1-1/2 in set screw, 8 in maximum iron pipe size, 11 ft/lb setscrew torque, 3/4 in throat opening |