nVent HOFFMAN PF2080 Front/Rear Plinth, 31.42 in W x 2.46 in D x 7.87 in H, For Use With 800 mm W x 200 mm H Floor Standing Enclosure, 16 ga Mild Steel, Umbra Gray
Modular Enclosure Bases
1333786
MFG #: PF2080
nVent HOFFMAN
396.72000
/ ea
- Application: Controls and Drives; Factory Automation and Process Control
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: PF2080
- Consist Of: Front/Rear Plinths; Mounting Components and Instruction Manual
- Construction: 16 gauge
- Country of Origin: RO
- Currency: USD
- EU RoHS Indicator: Y
- Gross Volume Per Pack: 5.31
- Gross Weight Per Pack: 17.7600 lb
- Gross Weight per Pack Metric: 8.06
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 9403999045
- Height: 12.00 in
- Height [Metric]: 30.4800 cm
- Item Group: FCY
- Length: 31.87 in
- Length [Metric]: 80.9498 cm
- Returnable: Y
- Type: IEC Enclosure Accessories
- UNSPSC: 39121334
- UPC 11: 78351052573
- UPC 12: 783510525736
- Width: 24.00 in
- Width [Metric]: 60.9600 cm
- Stock Status: NONSTOCK
- Brand: nVent HOFFMAN
- Manufacturer: HOFFMAN ENCLOSURES
- Color: Umbra Gray
- Material: Mild Steel
- Size: 7.87 x 31.42 x 2.46 inch
nVent HOFFMAN Front/Rear Plinth, Series: PF Series, 31.42 in W x 2.46 in D x 7.87 in H Size, Floor/Panel Mounting, For Use With: 800 mm W x 200 mm H Floor Standing Enclosure, 16 ga Mild Steel, Powder Coated, Umbra Gray
- Applications
- Features
| Controls and Drives; Factory Automation and Process Control |
| The front and rear plinth allows for cabling without any restrictions in accordance with the VDE 0113 standard |
| Painted steel plinth with front and rear removable panels for mild steel floor standing enclosures |
| The plinth is mounted underneath the enclosure to provide extra space between the installation floor and the enclosures bottom plates, this space is accessible by removing the front or rear panel |
| Installing cables into the enclosure can be done easily as the plinth creates extra space below the enclosure |
| This extra space allows the installer to route the cables through the plinths for bayed enclosures |
| The plinth allows enclosures to be fixed to the floor without the need for interior access |