Appleton® 4OVB-1/2 Octagon Box With Knockouts, Steel, 15.5 cu-in, 8 Knockouts
Octagon Boxes
18118
MFG #: 4OVB-1/2
Appleton™
24.17000
/ ea
- ARRA Compliant: Y
- Buy American Compliant: Y
- Catalog Number: 4OVB-1/2
- Country of Origin: US
- Cubic Capacity: 15.5 CU-IN in³
- Currency: USD
- Diameter: 4 in
- Enclosure Type: NEMA OS-1
- EU RoHS Indicator: C
- Finish: Pre-Galvanized
- Gross Weight Per Pack: 0.6100 lb
- Gross Weight per Pack Metric: 0.28
- Gross Weight UOM Metric: kg
- Height: 0.22 in
- Height [Metric]: 5.5880 mm
- Knockout Size: 1/2 in
- Knockouts: 8
- Length: 15.00 in
- Length [Metric]: 38.1000 cm
- Mounting Orientation: Vertical
- Mounting Type: Bolt-On/Threaded
- Shape: Octagon
- Size: 4 X 4 X 1.5 IN in
- Standard: UL Standard 514A; UL Listed E2527; Nema OS-1
- Standards: UL 514A File No. E2527
- Sub Brand: ETP
- Type: Octagonal Box
- UNSPSC: 39121308
- UPC 11: 68785575480
- UPC 12: 68785575480
- Width: 13.00 in
- Width [Metric]: 33.0200 cm
- Stock Status: NONSTOCK
- Brand: Appleton™
- Manufacturer: Appleton
- Capacity: 15.5 in³
- Dimensions: 1-1/2 in D
- Material: Steel
- Number of Knockouts: 8
Appleton® Octagon Box, 8 Knockouts, 1/2 in Knockout, Octagon, NEMA OS-1, 15.5 cu-in, Steel, Pre-Galvanized, 4 in H x 4 in W x 1-1/2 in D
- Catalog URL - Appleton_132AP1_2_Catalog.pdf(Catalog URL)
- http://www.egseg.com(Seller Home Page URL)
- Seller Home Page URL - home.aspx(Seller Home Page URL)
- Spec Sheet URL - 11301_ILP5F1DHSNK3UO86.pdf(Spec Sheet URL)
- Spec Sheet URL - 4-octagon-boxes-extension-rings-covers-catalog-pages-en-724288.pdf(Spec Sheet URL)
- Features
| With 1/2 IN Conduit Knockouts, 1-1/2 IN Deep, Vertical Bracket With Stud, Set Back 5/8 IN |
| Boxes with concentric or eccentric knockouts are suitable for bonding without any additional bonding means where used in circuits above or below 250 VAC |
| Unless otherwise noted all concentric or eccentric knockouts are 1/2 to 3/4 in combinations |
| Single and double gang metallic outlet and switch boxes are acceptable for use in two hour fire rated walls |
| Groundskeeper raised ground feature on boss inside box provides one or two #10-32 tapped hole, allowing a 3/8 in long green ground screw to be threaded into box without contacting mounting surface |
| Other boxes provided with flat ground tapped hole, except plenum boxes |
| (5) 1/2 in bottom, (3) 1/2 in side knockouts |