RadioRA® RR-AUX-REP-WH Auxiliary Repeater, RS485 Port
Network Repeaters
598653
MFG #: RR-AUX-REP-WH
Lutron®
330.00000
/ ea
- Catalog Number: RR-AUX-REP-WH
- Country of Origin: US
- Dimensions: 5-1/4 in H x 4-1/4 in W x 1-1/6 in D
- Enclosure: Plastic
- Environmental Conditions: 0 to 90% Non-Condensing Humidity
- Frequency Rating: 431 to 437 MHz
- Functions: Signal extender
- Gross Weight Per Pack: 1.0500 lb
- Height: 1.06 in
- Indication: LED
- Input: 9 VDC/300 mA
- Length: 5.25 in
- Material: Plastic
- Mounting: Ceiling/Surface
- Mounting Type: Ceiling/Surface
- Power Supply: 300 mA at 120 VAC
- Standard: cUL, FCC, ICC, COFETEL, ASEP, Bermuda Department of Telecommunications, CRC, INDOTEL, SUTEL
- Standards: ASEP/COFETEL/CRC and FCC Certified, cULus Listed, INDOTEL Certified and SUTEL Certified
- Sub Brand: RadioRA 2
- Temperature Rating: 32 to 104 °F
- Type: Repeater, auxiliary
- UNSPSC: 32151703
- UPC 11: 02755777466
- UPC 12: 027557774666
- Voltage Rating: 9 VDC/300 mA
- Width: 4.25 in
- Stock Status: NONSTOCK
- Brand: Lutron®
- Manufacturer: Lutron Electronics Co., Inc
- Port Type: RS485
RadioRA® 2 Repeaters extend the range of Radio Frequency (RF) signals that are sent between devices. Repeaters ensure error-free communication between system components and prevent interference from neighboring systems.
- Features
Extend the range of Radio Frequency (RF) signals that are sent between devices. Ensure error-free communication between system components and prevent interference from neighboring systems. Repeater has an RF range of 30 ft (9 m). Main Repeater is required for use. |
For systems that extend up to 30 ft (9 m), one (1) main repeater is required to set up the system |
Up to four (4) auxiliary repeaters can be added to extend the RF range for larger system applications |
Each repeater has an RF range of 30 ft, covering a total area of approximately 2500 sq ft |
One LED on, powered by the 9 V adapter test condition |
Power failure memory should power be interrupted, the repeater will return to its previous state when power is restored |
Tested to withstand electrostatic discharge without damage or memory loss |
Tested to withstand surge voltages without damage or loss of operation |
Mount on a wall, ceiling, or level surface using the two M3 screws provided |