Panduit® FST2MC6EI Fiber ST2 Simplex Multimode Opticam Conn
Fiber Optic Connectors
1015459
MFG #: FST2MC6EI
Panduit®
16.98000
/ ea
- Application: Maintenance or emergency restoration of fiber networks and retrofit/initial install in both behind-the-wall (BTW) and in the permanent side of panelized interconnect and cross-connect.
- ARRA Compliant: Y
- Buy American Compliant: Y
- Catalog Number: FST2MC6EI
- Color: Electric Ivory
- Connection: ST
- Country of Origin: CRI
- Currency: USD
- EU RoHS Indicator: Y
- Fiber Size: 900mm
- Gross Volume UOM: CF
- Gross Volume UOM Metric: m3
- Gross Weight Per Pack: 0.0300 lb
- Gross Weight per Pack Metric: 0.01
- Gross Weight UOM Metric: kg
- Height: 1.00 in
- Height [Metric]: 2.5400 cm
- Insertion Loss: NA dB
- Length: 3.50 in
- Length [Metric]: 8.8900 cm
- Material: Ceramic
- Returnable: Y
- Standard: RoHS Compliant; TIA/EIA-604 FOCIS-2 compliant; exceeds TIA/EIA-568-D.3 requirements
- Standards: ARRA CompliantBuy American Act CompliantRoHS Compliant, TIA/EIA-568-D.3, TIA/EIA-604 FOCIS-2
- Sub Brand: OptiCam?®
- Temperature Rating: 140 ?°F
- Type: Fiber Optic Connectors, ST2 OptiCam
- UNSPSC: 43223310
- UPC 11: 61305625928
- UPC 12: 613056259287
- Width: 5.00 in
- Width [Metric]: 12.7000 cm
- Stock Status: NORMALLY STOCKED
- Brand: Panduit®
- Manufacturer: Panduit®
- Cable Construction: 900 um Buffered
- Connector Type: ST2 Simplex
- Ferrule Type: Zirconia Ceramic
- Fiber Type: OM1
ST2 OM1 900um multimode simplex fiber optic connector. Ivory Boot. For use with OCTT2 OptiCam fiber termination tool.
- http://www.panduit.com(Seller Home Page URL)
- Install Instructions URL - ID-INS-v1-N-FBFS133--RevR--ENG.pdf(Install Instructions URL)
- Owners Manual URL - 10965_BAQ7SNO40GUKTZL3.pdf(Owners Manual URL)
- Spec Sheet URL - 10965_BU137W5JTACGZX9F.pdf(Spec Sheet URL)
- Tech Bulletin URL - 10965_JI8YT9BZMWGLXOR2.pdf(Tech Bulletin URL)
- Tech Drawing URL - 10965_GOY81XVSIUZ329JD.pdf(Tech Drawing URL)
- Applications
- Features
| Maintenance or emergency restoration of fiber networks and retrofit/initial install in both behind-the-wall (BTW) and in the permanent side of panelized interconnect and cross-connect. |
| Factory pre-polished fiber stub end face eliminates inconsistent and time consuming field polishing to deliver required optical performance |
| Dual cam design with fiber and buffer clamps secures both the fiber and the buffer during the camming step to facilitate consistent termination results, reduces the termination time compared to conventional termination methods |
| Translucent inner housing assembly facilitates inspection of the fiber termination quality, results in rapid installations, improved termination yields and lower installed costs |
| Non-optical disconnect design maintains data transmission under tensile loads |
| Mechanical cable retention consistently provides higher than industry standard cable retention, requires no adhesive, speeding installation |
| Reduces termination time (less than half the time of field polish connectors) and the number of installation tools required |