Bogen® M300 M-CLASS Dual Channel Power Amplifier, 95 to 130 VAC, 20 Hz to 20 kHz Response, 103 dB SNR

Audio & Video Amplifiers
PDW~6741046 MFG #: M-300
Bogen®
2011.37000 / ea
IDW_Bogen_M300
  • Catalog Number: M-300
  • Country of Origin: CN
  • Dimensions: 17 in L x 18-1/2 in W x 3-1/2 in H
  • Gross Weight Per Pack: 1 lb
  • Impedance: 8 Ohm
  • Series: M-CLASS
  • Standards: C/US UL 60065
  • Type: Dual Channel
  • UNSPSC: 52161547
  • UPC 11: 76536839104
  • Stock Status: NONSTOCK
  • Brand: Bogen®
  • Manufacturer: Bogen Communications, Inc.
  • Frequency Response: 20 Hz to 20 kHz
  • Signal to Noise Ratio: 103 dB
  • Voltage Rating: 95 to 130 VAC
Bogen's M-Class delivers on what professional sound installers need most - Flexibility, Power, and Reliability. Flexibility - 3 modes of operation: Stereo, 70V Mono, or Dual Mono; and 2 modular input bays for a variety of prioritized input types. Power - up to 600W/ch stereo or 1200W of 70V mono power. Reliability - Massive power toroid and heat sinks; heavy 14-gauge chassis; patented Back-Slope™ AC voltage stabilization; Clip limiters, DC voltage, over-current, and thermal protection circuits.
QTY
Add to Wishlist
  • Features
Delivers on what professional sound installers need most-flexibility, power and reliability ; Flexibility - 3 modes of operation: Stereo, 70 V Mono or Dual Mono ; 2 modular input bays for a variety of prioritized input types ; Power - up to 600 WTT per channel stereo or 1200 WTT of 70 V mono power ; Reliability - Massive power toroid and heat sinks, heavy 14-gauge chassis, patented back-slope AC voltage stabilization, clip limiters, DC voltage, over-current, and thermal protection circuits ; 3 mono power levels: 1200 WTT, 900 WTT or 600 WTT for 70 V speaker systems ; 3 stereo power levels: 600 WTT, 450 WTT or 300 WTT per channel AT 4 OHM and 400 WTT, 300 WTT or 200 WTT per channel at 8 OHM ; Low noise, low distortion and high slew rate ; Flexible modular input capability (2 module capacity) ; Professional, dual-channel (balanced or unbalanced), high-impedance input module with gain selection included ; 3 selectable low-frequency, roll-off choices ; 2x1 mixer function when in mono modes ; Insert connections for outboard equipment (in mono modes) ; Post and Pre-EQ Output Feeds (summed mono out in stereo mode) ; DC, overload, short circuit, and thermal protection circuits ; Clip limiting circuits for speaker protection ; Power-saving sleep mode for intermittent use applications ; Status, signal and clip/limit indicators ; Back-Slope AC voltage stabilization for dependable performance over varying AC line voltages ; Heavy-gauge steel chassis with cast aluminum front panel ; Recessed volume control knobs with snap-on protective cover ; Mounts in 2 rack spaces (3-1/2 IN) directly stackable without need for extra space above or below ; 2 independent, continuously variable, cooling fans for dependable and quiet operation ; Easily removable front fan grilles with filters ; Stable into 2-ohm loads ; S/N Ratio (20kHz BW): 103 DB ref. 8 OHM, F.P. ; Class of Operation: AB ; THD at 1 KHZ rated power: less than 0.02 PCT ; Load Impedance: 4 - 8 OHM, 70 V ; Minimum Load Impedance (Stereo): 3.2 OHM ; Output Regulation: 1 KHZ direct-0.5 DB at 8 OHM, 1 KHZ bridged-1.5 DB at 70 V ; Cooling: Forced air variable speed fan ; Input Sensitivity: 0.840 V for 300 WTT at 4 OHM (At Backplane Connector Or Using Standard Input Module Set To Gain Of 0 DB) ; Connector: Power-15 AMP Line Cord, Output: 5-Pin Touch-Proof Barrier Strip, RCA Pre And Post-EQ ; 15 to 105 &176; FOperating temperature ; Bandwidth: 20 HZ to 40 KHZ At 0.5 PCT THD"
1195 BTU/HR, 12 A thermal emission
3 modes of operation: Stereo (4 ohm), Dual Mono (4 ohm), or 70 V Mono
3 mono power levels: 600 W, 900 W, or 1200 W for 70 V speaker systems
3 stereo power levels: 300W, 450W, or 600W per channel at 4 ohms
2 x 1 mixer function in mono modes
2 Module input bays for flexible modular input capability
Low noise, low distortion, and high slew rate
Flexible modular input capability (2 module capacity)
Professional, dual-channel (balanced or unbalanced), high-impedance input module with gain selection included
3 selectable low-frequency, roll-off choices
Insert connections for outboard equipment (in mono modes)
Post- and Pre-EQ Output Feeds (summed mono out in stereo mode)
DC, overload, short circuit, and thermal protection circuits
Clip limiting circuits for speaker protection
Power-saving Sleep Mode for intermittent use applications
Status, Signal, and Clip/Limit indicators
Back-Slope AC voltage stabilization for dependable performance over varying AC line voltages
Heavy gauge steel chassis with cast aluminum front panel, 2 independent, continuously variable, cooling fans for dependable and quiet operation
Recessed volume control knobs with snap-on protective cover
Mounts in 2 rack spaces (3-1/2 in) directly stackable without need for extra space above or below