Panduit® Pan-Way® ECFX10IW-X Power Rated End Cap Fitting, For Use With LDPH10 and LD2P10 Series Raceway, ABS, White

Raceway End Fittings
6234 MFG #: ECFX10IW-X
3.11000 / ea
  • ARRA Compliant: Y
  • Buy American Compliant: Y
  • Catalog Number: ECFX10IW-X
  • Country of Origin: CRI
  • Cover Type: End Cap
  • Currency: USD
  • Dimensions: 1.25 in L x 1.62 in W x 0.93 in H
  • EU RoHS Indicator: Y
  • Gross Volume UOM: CF
  • Gross Volume UOM Metric: m3
  • Gross Weight Per Pack: 0.030 lb
  • Gross Weight per Pack Metric: 0.68
  • Gross Weight UOM Metric: kg
  • Height: 4.45 in
  • Height [Metric]: 11.3030 cm
  • Length: 10.05 in
  • Length [Metric]: 25.5270 cm
  • Mounting Type: Snap-On
  • Returnable: Y
  • Standard: Ul94V-0, Ft4, Meets TIA/EIA Standards, UL5A Listed, UL Compliant.
  • Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantCE CertifiedUL94 V-0 Flammability RatingFT4 RatedMeets TIA/EIA Standards
  • Sub Brand: Pan-Way?®
  • Type: Power Rated Fittings
  • UNSPSC: 39131711
  • UPC 11: 07498352954
  • UPC 12: 07498352954
  • Width: 6.45 in
  • Width [Metric]: 16.3830 cm
  • Stock Status: NONSTOCK
  • Brand: Panduit®
  • Manufacturer: Panduit®
  • Color: Off-White
  • Material: ABS
  • Suitable For Use With: Pan-Way® LDPH10 and LD2P10 Series Surface Raceway System
Type LD2P10 non-metallic two channel, one-piece tamper resistant latch design, adhesive backed, hinged cover surface raceway shall be used to route, protect and conceal low voltage data, voice, fiber optic and power cabling. The raceway shall be listed as suitable for use in applications having up to 600V between conductors by Underwriters Laboratories, Inc. per Standard 5A and by Canadian Standards Associations per C22.2 No. 62.1-03 when installed per instructions. The raceway includes a full complement of bend radius control (BRC) fittings consisting of, but not limited to: elbows, (internal and external), couplings for joining raceway sections, blank end fittings for closing open ends of the raceway, entrance end fittings, reducer fittings, tee fittings, and an optional raceway installation tool. The BRC fittings shall incorporate a minimum of 1" bend radius as recommended for Category 6 UTP and fiber optic cabling in TIA/EIA 569-B. This non-metallic surface raceway shall be manufactured in two standard lengths from impact resistant material with a flammability rating of UL94V-0. The non-metallic raceway finish shall be pure color, resist scratches and dents and not peel or corrode. The raceway shall be available in four standard colors and shall be optimized for use with Panduit® Pan-Net® ® Network Cabling Systems.
  • Applications
  • Features
Pan-Way ® LD Surface Raceways are Designed to Provide Easy and Economical Solutions For Routing any Low Voltage Cable Along Smooth and Clean Perimeter Walls, Baseboards or Ceilings. This Raceway is a Perfect Solution for Schools, Hospitals, Offices, Homes
One-piece hinged design
1 in bend radius control fittings
Adhesive backing
Available in different sizes and lengths
Non-metallic construction
Distinct colors
Full selection of fittings and surface mount boxes
Off-White color