DRAIN 3/4" ORDINARY LOC-STEEL

Explosion Proof Conduit Breather & Drains
599920 MFG #: CRN75S
Appleton™
20.91000 / ea
Appleton_CRN50S_DET
  • ARRA Compliant: N
  • Buy American Compliant: N
  • Catalog Number: CRN75S
  • Connection: Tapered Male Threaded
  • Country of Origin: MX
  • Currency: USD
  • EU RoHS Indicator: N
  • Gross Weight Per Pack: 0.2400 lb
  • Gross Weight per Pack Metric: 0.11
  • Gross Weight UOM Metric: kg
  • Height: 0.15 in
  • Height [Metric]: 3.7592 mm
  • Length: 6.60 in
  • Length [Metric]: 16.7640 cm
  • Standard: CSA C22.2 No. 30, CSA 065181, UL Listed For Class I, Division 2
  • Standards: CSA C22.2 No. 30CSA 065181Class I, Div 2
  • Type: Dust-Ignitionproof
  • UNSPSC: 39121311
  • UPC 11: 78138178568
  • UPC 12: 781381785686
  • Width: 6.40 in
  • Width [Metric]: 16.2560 cm
  • Stock Status: NONSTOCK
  • Brand: Appleton™
  • Manufacturer: Appleton
  • Finish: Zinc Electroplated
  • Material: Steel
  • Size: 3/4 in
Where condensation may be a problem, drain fittings are installed at the bottom of the enclosures to drain away moisture. Breather fittings are generally installed at the top of an enclosure to allow water vapor to escape and minimize condensation within the enclosure interior. Universal drain/breather fittings provide both functions in a single fitting that can be installed at the top and/or bottom of the enclosure housing. Appleton Group offers fittings for both hazardous and ordinary locations, along with conductive and non-conductive thread/joint lubricants to prevent seizing and galling of these and other threaded components.
QTY
Add to Wishlist
  • Features
Non-hazardous location; To provide a means for the prevention and/or release of condensation when properly installed in the appropriate location; Explosionproof, dust-ignitionproof; Accurately tapped, tapered threads for tight, rigid joints and ground continuity; Generally installed at bottom of enclosure housing to drain moisture caused by condensation
Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity
Tapered MNPT connection
To provide a means for the prevention and/or release of condensation when properly installed in the appropriate location
For non-hazardous location
Generally installed at bottom of enclosure housing to drain moisture caused by condensation
Zinc Electroplated
Class I, Division 1 And 2 Groups B, C, D, Class II, Division 1 and 2 Groups E, F, G, Class III