Killark® EYS-1 EYS Conduit Sealing Fitting, 1/2 in, For Use With Vertical/Horizontal Conduits, Aluminum, Powder Coated
Conduit Sealing Fittings
28198
MFG #: EYS-1
Killark
59.85000
/ ea
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: EYS-1
- Color: Gray
- Country of Origin: MX
- Currency: USD
- Dimensions: 1.8125 in L x 1.375 in W x 3.9375 in H
- EU RoHS Indicator: C
- Gross Volume Per Pack: 37.56
- Gross Volume per Pack Metric: 615.54
- Gross Volume UOM: CI
- Gross Volume UOM Metric: cm3
- Gross Weight Per Pack: 0.4700 lb
- Gross Weight per Pack Metric: 0.21
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 7609000000
- Height: 2.75 in
- Height [Metric]: 6.9850 cm
- Hub Size: 0.5 in
- Length: 4.75 in
- Length [Metric]: 12.0650 cm
- Returnable: Y
- Series: EYS
- Standard: UL, CSA
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantCSA File No. LR11716UL File No. E10514Class I, Div 1 & 2, Groups C, D, Class I, Zone 1, Groups IIB, IIA, Class II, Div 1 & 2, Groups E, F, G, Class III
- Type: Sealing Fitting
- UNSPSC: 39131708
- UPC 11: 78393611011
- UPC 12: 78393611011
- Width: 4.75 in
- Width [Metric]: 12.0650 cm
- Stock Status: NONSTOCK
- Brand: Killark
- Manufacturer: Hubbell
- Finish: Powder Epoxy Paint
- Material: Aluminum, Copper Free (less than 4/10 of 1%)
- Size: 1/2 in
- Suitable For Use With: Vertical/Horizontal Conduit
Killark is known for providing individual client solutions to complex environmental requirements. Reliable and proven technology, coupled with value added engineering enables lower total installation costs with a lifetime of savings.
- http://www.hubbell-killark.com/(Seller Home Page URL)
- Install Instructions 1 URL - 11161_283TG5H6EQSCBRNP.pdf(Install Instructions 1 URL)
- Spec Sheet URL - 11161_2HYWIDNZK3MOQBTL.pdf(Spec Sheet URL)
- Warranty URL - 11161_ID-WAR-Warranty_Front_Pages_DNC_4-1-2011.pdf(Warranty URL)
- Warranty URL - Warranty_Front_Pages_DNC_4-1-2011.pdf(Warranty URL)
- Applications
- Features
| Class I, Divisions 1 and 2: The purpose of seals in a Class I hazardous location is to minimize the passage of gases and vapors and prevent the passage of flames from one electrical installation to another through the conduit system. Seals are required to |
| Copper-free aluminum (less than 4/10 of 1%). Electrostatically applied powder coating. |
| Class I, Divisions 1 and 2: The purpose of seals in a Class I hazardous location is to minimize the passage of gases and vapors and prevent the passage of flames from one electrical installation to another through the conduit system |
| 1-3/16 in turning radius |
| Female x Female connection |
| Copper-free aluminum (less than 4/10 of 1%) |
| Electrostatically Applied Powder Coated |