Appleton® TB17SA Wedge-Lok™ TB17-SA Type TB Conduit Body, 1/2 in Hub, 7, 6 cu-in, Aluminum, Epoxy Powder Coated

Type TB Conduit Fitting Body
390607 MFG #: APPTB17SA
Appleton™
24.98000 / ea
Appleton_TB17_SA_DET
  • Application: For Use With Rigid Steel, Rigid Aluminum Conduit And IMC
  • ARRA Compliant: Y
  • Buy American Compliant: C
  • Catalog Number: APPTB17SA
  • Connection: Tapered Female Threaded
  • Country of Origin: MX
  • Currency: USD
  • EU RoHS Indicator: C
  • Gross Weight Per Pack: 0.5100 lb
  • Gross Weight per Pack Metric: 0.23
  • Gross Weight UOM Metric: kg
  • Height: 0.32 in
  • Height [Metric]: 8.1280 mm
  • Item Group: 0130A
  • Item Group 2: 013
  • Length: 12.80 in
  • Length [Metric]: 32.5120 cm
  • Returnable: Y
  • Standard: UL 514A, UL 514B, UL File Number E2527, CSA C22.2 No. 18.3, CSA 065183, NEMA FB-1
  • Standards: UL 514A, 514B, E2527, CSA C22.2 No 18.3, 065183, NEMA FB-1
  • Sub Brand: UNILETS
  • Type: Type TB Conduit Outlet Body
  • UNSPSC: 39131708
  • UPC 11: 78138160104
  • UPC 12: 781381601047
  • Width: 10.50 in
  • Width [Metric]: 26.6700 cm
  • Stock Status: NONSTOCK
  • Brand: Appleton™
  • Manufacturer: Appleton
  • Finish: Epoxy Powder Coated
  • Form: 7
  • Hub Size: 0.5 in
  • Material: Aluminum
FM7 Unilet conduit bodies provide plenty of room for pulling cables and wiring connections. Accurately tapped tapered threads ensure tight, rigid joints and excellent ground continuity.
QTY
Add to Wishlist
  • Applications
  • Features
For Use With Rigid Steel, Rigid Aluminum Conduit And IMC
Serve as pulling fittings; Make bends in conduit system; Provide openings for splicing; Connect and change direction of conduit runs; Allow connections for branch runs; Permit access to conductors for maintenance; Smooth, rounded integral bushings in hubs protect conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity; Completely interchangeable with Crouse-Hinds Form 7 bodies, gaskets and covers; Equivalent FM7 and Form 7 units have identical applications and installation dimensions; Flat back design provides greater cubic content for easier wire pulling and more room for splicing; Fits flush and snug against flat surfaces for more stable installation; Smooth hub openings allow easy conduit joining; Hub size, body style, compliance data, maximum wire number/size and cubic capacity molded into body; Wiring capacity: 6 CU-IN as per NEC 314.16(A)
Smooth, rounded integral bushings in hubs protect conductor insulation
Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity
Wedge-Lok™ form-in-place covers with integral gasket are approved for use in wet locations
Grayloy-iron bodies with cast covers and gasket are approved for use in wet locations
Unique Wedge-Lok™ clip cover design allows easy removal at any later time, without damaging the conduit body and cover is secured with clips, not screws
Completely interchangeable with Crouse-Hinds form 7™ bodies, gaskets and covers
Equivalent FM7™ and form 7™ units have identical applications and installation dimensions
Flat-back design provides greater cubic content for easier wire pulling, and more room for splicing
Fits flush and snug against flat surfaces for more stable installation
Smooth hub bushings and cover openings protect conductor insulation
Smooth hub openings allow easy conduit joining
Pan head cover screws secure cover clips and provide superior screwdriver seating and torque
Cover screws and clips are captive to prevent loss
Hub size (in), body style, compliance data, maximum wire number/size and cubic capacity molded into body
Stainless steel cover screws
Copperfree (4/10 of 1% maximum) aluminum
Zinc electroplate steel covers
Epoxy powder coat cast aluminum bodies and covers
Serve as pulling fittings
Make bends in conduit system