Hoffman CTD366012 CONCEPT™ CW1 2-Door Wall Mount Enclosure, 36 in L x 60 in W x 12 in D, NEMA 12/IP55, Steel
Wall Mount Enclosures
300876
MFG #: CTD366012
nVent Hoffman
1664.87000
/ ea
Hoffman Wall Mount Enclosure, 2-Door, Series: CONCEPT™ CW1, 36 in Length, 60 in Width, 12 in Depth, NEMA 12/IP55, Concealed Hinged Cover, 34.2 x 58.2 in Panel, Quarter Turn Latch Lock, Wall Mount, Steel, Powder Coated, Gray
- http://www.hoffmanonline.com(WEB SELLER HOME PAGE URL)
- WEB INSTALL INSTR URL - stream_document.aspx?rRID=19409&pRID=7912(WEB INSTALL INSTR URL)
- WEB SPEC SHEET URL - Spec-00286.pdf(WEB SPEC SHEET URL)
- WEB TECH DRAWING URL - 77760.zip(WEB TECH DRAWING URL)
- WEB WARRANTY URL - terms-of-sale(WEB WARRANTY URL)
- Applications
- Features
For machine control applications |
Streamlined styling, flush quarter turn latches and an attractive, durable finish |
Seams continuously welded and ground smooth |
corner formed door |
Simple easy-to-remove and install hinge pins with built-in captivation clip |
High-torque threadless studs and fasteners on door |
Minimum width body flange provides maximum door opening |
External formed body flange |
Door opens 210 degrees |
Seamless foam-in-place gasket |
Door alignment device on doors wider than 30 in |
Four hinges on 60 in high enclosures |
Grounding stud on body, bonding provision on door |
Provisions on door for optional high-impact thermoplastic data pocket |
Overlapping door design provides full-width access |
Three-point latch system on right-hand hinged door with quarter turn, slotted latch |
Removable door with hidden hinges for clean, aesthetic appearance |
Hardware kit with panel mounting nuts, panel grounding |
Installation instructions provided |
14 ga steel, polyester powder coated |
ANSI 61 gray |
16 or 14 gauge steel, Seams continuously welded and ground smooth, Corner-formed doors, Simple easy-to-remove and install hinge pins with captivation clip, High-torque threadless studs and fasteners on door, Minimum-width body flange provides maximum door opening, Door opens 210?degrees, External formed body flange, Panel mounting studs fit optional CONCEPT panels and other accessories, Mounting holes in back of body for direct mounting or optional external mounting brackets, Removable door with hidden hinges for clean, aesthetic appearance, Seamless foam-in-place gasket, Quarter-turn slotted latch(es), Door alignment device on doors wider than 30 in., Four hinges on 60-in.-high enclosures, Grounding stud on body; bonding provision on door (except window-door models), Provisions on door for optional high-impact thermoplastic data pocket, Hardware kit with panel |