Appleton® LPB150LMT Ballast Body, High Pressure Sodium Lamp, 150 W Lamp, 120/208/240/277 VAC, 12.38 in W
Ballast Bodies
294256
MFG #: LPB150LMT
Appleton™
1793.21000
/ ea
Appleton® Ballast Body, High Pressure Sodium Lamp, 150 W Lamp, 188 W, 120/208/240/277 VAC, 2/1.15/1/0.85 A Starting/1.7/0.95/0.85/0.72 A Operating, 40 deg C, For Use With: Mercmaster II HID Luminaires, 12.38 in Width, Aluminium, Baked Epoxy Painted, Gray
- http://www.appletonelec.com(Seller Home Page URL)
- Seller Home Page URL - appleton(Seller Home Page URL)
- Spec Sheet 1 URL - Appleton_LPB175PMT_Specification_Sheet_1.pdf(Spec Sheet 1 URL)
- Spec Sheet 2 URL - ID-SPE-v1-781381630887_spec.pdf(Spec Sheet 2 URL)
- Spec Sheet URL - 11043_SPE_781381630887_spec.pdf(Spec Sheet URL)
- Spec Sheet URL - SPE_781381630887_spec.pdf(Spec Sheet URL)
- Warranty URL - appleton-grp-terms-and-conditions.pdf(Warranty URL)
- Applications
- Features
| For Globe Or 12 IN Refractor |
| Mercmaster II HID luminaires provide reliable, efficient lighting in an enclosed and gasketed design for locations subject to moisture, dust, dirt and corrosive atmospheres; Epoxy powder coat finish electrostatically applied for complete uniform corrosion protection; Positive sealing; Hinge and bolt construction assures 360 DEG compression at all points on gasket; One-piece ballast housing for each component provides even heat dissipation for cooler operation and longer ballast life; Heat barrier isolates capacitor from ballast; Standard non-PCB biodegradable capacitors installed in separate compartment; Mogul socket is furnished with 200 DEG C welded leads, pre-wired to the ballast; Porcelain socket assures trouble-free operation in high ambient installations; Suitable for use in wet and outdoor saltwater locations; 90 PCT minimum power factor; For use in tunnels, walkways, bridges, storage facilities, processing plants, parking lots, foundries, manufacturing plants, power plants and |
| HPF ballast |
| 12 in Dia nominal refractor, 5-1/2 in Dia threaded |
| Cast copperfree (4/10 of 1% max) aluminum with electrostatically applied baked gray epoxy clad finish ballast body |
| 90% minimum power factor |
| Globes are heat-resistant prismatic glass, reflectors are FRP with a polyester finish |
| Hinge and bolt construction assures 360 deg compression at all points on ballast housing gasket for positive sealing |
| For electrical protection, a ground wire is provided on each Mercmaster to bond hood and ballast housing |
| 90 deg C supply wire temperature |
| Mounting hood |