3M™ 5300 Pigtail Motor Lead Splice Kit, 0- 1000 V, 10 to 4 AWG Feeder Cable, 12 to 4 AWG Motor Lead Conductor
Insulated Splice Kit, Low Voltage (below 5 KV)
830428
MFG #: 5301
3M™
91.01000
/ ea
- Alternate Catalog Number: 5301
- Application: motor lead 12-14 AWG
- ARRA Compliant: X
- Buy American Compliant: X
- Cable Size: 10-4
- Catalog Number: 5301
- Color: Black
- Connector Type: Pigtail
- Country of Origin: US
- Currency: USD
- Dimensions: 4 in L
- EU RoHS Indicator: Y
- Expiry|Spoilage Date Applicable Indicator: Y
- Gross Weight Per Pack: 0.5000 lb
- Gross Weight per Pack Metric: 0.23
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8546900000
- Height: 3.40 in
- Height [Metric]: 8.6360 cm
- Insulation Size: 0.17 to 0.36 in OD in
- Length: 7.90 in
- Length [Metric]: 20.0660 cm
- Material Composition Declaration: RoHS 2011/65/EU compliant without exemption
- Number Of Conductors: 1
- Returnable: Y
- Series: 5300
- Standards: ARRA CompliantBuy American Act CompliantRoHS 2011/65/EUCSA Certified
- Temperature Rating: 90 to 130 °C
- Type: Pigtail
- UNSPSC: 31270000
- UPC 11: 05400712263
- UPC 12: 054007122630
- Width: 6.00 in
- Width [Metric]: 15.2400 cm
- Stock Status: NONSTOCK
- Brand: 3M™
- Manufacturer: 3M™
- Conductor Size: 10 to 4 AWG, 12 to 4 AWG
- Material: EPDM Rubber
- Splice Length: 3.4 in
- Voltage Rating: 0 to 1000 VAC
3M 5300 Series Motor Lead Pigtail Splice Kit is perfect to use with copper compression, 1-hole lugs. It is designed to splice motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000V or less. The kit can make 3 splices and can be used on cables that can withstand a maximum temperature of 194 degrees F (90 degrees C).
- Compliance Cert URL - Scotch_054007_10083_Compliance_Certificate.pdf(Compliance Cert URL)
- http://www.3m.com(Seller Home Page URL)
- Install Instructions 1 URL - 11579_LJER5Z7ODYQWPN13.pdf(Install Instructions 1 URL)
- Install Instructions 1 URL - motor-lead-pigtail-splice-kits-5300-5301.pdf(Install Instructions 1 URL)
- Install Instructions URL - motor-lead-pigtail-splice-kits-5300-5301.pdf(Install Instructions URL)
- Safety Data Sheet URL - t15pdulyob7qityw3ssm.pdf(Safety Data Sheet URL)
- Seller Home Page URL - Country(Seller Home Page URL)
- Spec Sheet URL - 11579_18575.pdf(Spec Sheet URL)
- Spec Sheet URL - motor-lead-splicing-kits-5300-series.pdf(Spec Sheet URL)
- Applications
- Features
| motor lead 12-14 AWG |
| Fast and simple installation |
| No torches or heat source required |
| No special tools required to install splice |
| Thick walls to resist puncture and abrasion damage |
| High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress |
| Easy re-entry, can be used on cables with a rated operating temperature of 90 deg C and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connections for 1000 VAC and less cables sized 16 AWG to 500 kcmil |
| Suitable for use with 30000 series copper compression lugs or other ul listed copper lugs |
| 365 V/mil dielectric strength |
| 750% elongation |
| 1400 psi tensile strength |
| 1/2 in maximum bolt length |
| Polyethylene cable |
| 10 to 4 AWG feeder cable, 12 to 4 AWG motor lead conductor size |