Acme Electric® T2535183S Dry Distribution Transformer, 240/480 VAC Primary, 120/240 VAC Secondary, 25 kVA, 60 Hz
Isolation Transformers
63399
MFG #: T2535183S
Acme Electric
2030.19000
/ ea
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: T2535183S
- Connection Type: Lead Wire
- Cooling: Air Cooled/Dry
- Country of Origin: MX
- Currency: USD
- Dimensions: 16.13 in L x 13.34 in W x 18.44 in H
- Enclosure: NEMA 3R Steel
- Enclosure Type: NEMA 3R
- Fuse Rating: Primary: 150 AMP For 240 V, 70 AMP For 480 V, Secondary: 300 AMP For 120 V
- Gross Weight Per Pack: 250.0000 lb
- Gross Weight per Pack Metric: 113.40
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8504330020
- Height: 18.44 in
- Height [Metric]: 46.8376 cm
- Housing Material: Steel
- Length: 13.34 in
- Length [Metric]: 33.8836 cm
- Maximum Amperage Rating: 70/150/300 A
- Mounting: WALL
- Mounting Type: Wall
- Returnable: Y
- Standard: UL 506, UL File Number E79947V1, UL Control Number 50B8, UL Insulation Number H3221, CSA Certified, OSHA Compliant, ANSI, IEEE
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantUL 506 File No. E79947V1UL Control Number 50B8UL Insulation Number H3221CSA CertifiedOSHA ApprovedANSI SpecifiedIEEE CertifiedPROP65: Cancer and Reproductive Harm www.P65Warnings.ca.gov
- Temperature Rating: 115 °C
- Type: Dry
- UNSPSC: 39121001
- UPC 11: 04750373420
- UPC 12: 047503734209
- Width: 16.13 in
- Width [Metric]: 40.9702 cm
- Winding: Aluminum, Configuration: Primary - Two Winding, Secondary - Two Winding
- Stock Status: NORMALLY STOCKED
- Brand: Acme Electric
- Manufacturer: Acme Electric
- Frequency Rating: 60 Hz
- Phase: 1
- Power Rating: 25 kVA
- Primary Voltage: 240/480 VAC
- Secondary Voltage: 120/240 VAC
Acme's low voltage distribution transformers are designed for industrial and commercial applications. All of Acme's general purpose transformers are rated for 600 volts and below. Encapsulated units are offered in ratings up to 15kVA. Ventilated units are available in ratings up to 1000 kVA and meet the requirements of U.S. DOE 10 CFR Part 431 (NEMA TP1) efficiency standards.
- Install Instructions 1 URL - 11112_GMEQCKR8X4L35ATS.pdf(Install Instructions 1 URL)
- Install Instructions 1 URL - 11112_HP5W1VA2YL0ZOUM3.pdf(Install Instructions 1 URL)
- Install Instructions 1 URL - Acme Electric Manual A.pdf(Install Instructions 1 URL)
- Safety Data Sheet URL - HCC_SDS.pdf(Safety Data Sheet URL)
- Seller Home Page URL - en(Seller Home Page URL)
- Spec Sheet URL - 11112_O1VU3DXHTCYKNR7L.pdf(Spec Sheet URL)
- Spec Sheet URL - T2535183S.pdf(Spec Sheet URL)
- Tech Drawing URL - T2535183S.dwg(Tech Drawing URL)
- Tech Drawing URL - T-2-53518-3S.pdf(Tech Drawing URL)
- Warranty URL - WAR_product_warranty_information.pdf(Warranty URL)
- www.hubbell-acmeelectric.com(Seller Home Page URL)
- Features
| Encapsulated core and coil; Shielded for cleaner power; Encapsulated and completely enclosed design electrical grade silica and resin compounds completely enclose the core and coil to seal out all moisture and air, UL type 3R enclosure for indoor or outdoor service, encapsulation eliminates corrosion and insulation deterioration; Quiet operation with sound levels well below NEMA standards; 10-year limited warranty |
| Encapsulated core and coil |
| Shielded for cleaner power |
| Encapsulated and completely enclosed design electrical grade silica and resin compounds completely enclose the core and coil to seal out all moisture and air |
| Quiet operation with sound levels well below NEMA standards |
| UL type 3R enclosure for indoor or outdoor service, encapsulation eliminates corrosion and insulation deterioration |
| Air cooled/dry cooling |
| Electrostatic shield for enhanced protection |
| Four windings |
| Aluminum, two primary winding, two winding secondary |
| Ground studs for use with non-metallic conduit |