Acme Electric® T2535163S Dry Distribution Transformer, 240/480 VAC Primary, 120/240 VAC Secondary, 10 kVA, 60 Hz
Isolation Transformers
4365
MFG #: T2535163S
Acme Electric
1064.47000
/ ea
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: T2535163S
- Connection: Wire Lead Screw Terminal
- Cooling: Air Cooled/Dry
- Country of Origin: MX
- Currency: USD
- Enclosure: NEMA 3R Steel
- Fuse Rating: Primary: 60 AMP For 240 , 30 AMP For 480 , Secondary: 110 AMP For 120 V
- Gross Weight Per Pack: 125.0000 lb
- Gross Weight per Pack Metric: 57.61
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8504320000
- Height: 15.19 in
- Height [Metric]: 38.5826 cm
- Length: 10.84 in
- Length [Metric]: 27.5336 cm
- Mounting: WALL
- Returnable: Y
- Standard: UL 506, UL File Number E79947V1, UL Control Number 50B8, UL Insulation Number H3221, CSA Certified, OSHA Compliant, ANSI, IEEE
- Standards: UL 506, File No E79947V1, 50B8, H3221 Listed, CSA Certified, OSHA Compliant, ANSI Approved, IEEE
- Temperature Rating: 115 °C
- Type: Distribution Transformer
- UNSPSC: 39121001
- UPC 11: 04750373410
- UPC 12: 047503734100
- Width: 13.50 in
- Width [Metric]: 34.2900 cm
- Winding: Aluminum, Configuration: Primary - Two Winding, Secondary - Two Winding
- Stock Status: NORMALLY STOCKED
- Brand: Acme Electric
- Manufacturer: Acme Electric
- Frequency Rating: 60 Hz
- Phase: 1
- Primary Voltage: 240/480 V
- Secondary Voltage: 120/240 V
Acme's low voltage distribution transformers are designed for industrial and commercial applications. All of Acme's general purpose transformers are rated for 600 volts and below. Encapsulated units are offered in ratings up to 15kVA. Ventilated units are available in ratings up to 1000 kVA and meet the requirements of U.S. DOE 10 CFR Part 431 (NEMA TP1) efficiency standards.
- Install Instructions 1 URL - 11112_GMEQCKR8X4L35ATS.pdf(Install Instructions 1 URL)
- Install Instructions 1 URL - 11112_HP5W1VA2YL0ZOUM3.pdf(Install Instructions 1 URL)
- Safety Data Sheet URL - HCC_SDS.pdf(Safety Data Sheet URL)
- Seller Home Page URL - en(Seller Home Page URL)
- Spec Sheet URL - 11112_DTFIP0AVYLWZ568J.pdf(Spec Sheet URL)
- Tech Drawing URL - T2535163S.dwg(Tech Drawing URL)
- Warranty URL - WAR_product_warranty_information.pdf(Warranty URL)
- Features
Encapsulated core and coil; Shielded for cleaner power; Encapsulated and completely enclosed design electrical grade silica and resin compounds completely enclose the core and coil to seal out all moisture and air, UL type 3R enclosure for indoor or outdoor service, encapsulation eliminates corrosion and insulation deterioration; Quiet operation with sound levels well below NEMA standards; 10-year limited warranty |
Ground studs for use with non-metallic conduit |
Quiet operation with sound levels well below NEMA standards |
Electrostatic shield for enhanced protection |
Encapsulated core and coil |
Encapsulated and completely enclosed design electrical grade silica and resin compounds completely enclose the core and coil to seal out all moisture and air |
UL type 3R enclosure for indoor or outdoor service, encapsulation eliminates corrosion and insulation deterioration |
Air cooled/dry cooling |
Four windings |
Aluminum, two primary winding, two winding secondary |