SolaHD DT651H14S Ventilated Drive Isolation Transformer, 460 VAC Delta Primary, 460Y/266 VAC Secondary, 14 kVA, 60 Hz
Drive Isolation Transformers
438719
MFG #: DT651H14S
SolaHD™
1519.30000
/ ea
- Application: SCR Variable Speed Drives
- ARRA Compliant: Y
- Buy American Compliant: Y
- Catalog Number: DT651H14S
- Country of Origin: US
- Currency: USD
- Dimensions: 14 in L x 18 in W x 23 in H
- Enclosure: Nema 3R with weather shield
- Enclosure Type: NEMA 3R
- EU RoHS Indicator: Y
- Gross Weight Per Pack: 215.0000 lb
- Gross Weight per Pack Metric: 97.52
- Gross Weight UOM Metric: kg
- Height: 23.00 in
- Height [Metric]: 58.4200 cm
- KVA Rating: 11
- Length: 13.60 in
- Length [Metric]: 34.5440 cm
- Mounting Type: Floor
- NEMA Frame Size: NEMA 3R
- Number Of Phases: 3
- Standard: cULus Listed: E77014, UL 506, CSA C22.2 No. 66, Listed E25872, UL 1561
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantcULus File No. E77014UL 506 File No. E25872UL 1561 File No. E25872CSA C22.2 No. 66
- Type: Drive Isolation Transformers: 7.5-440 kVA, Three Phase
- UNSPSC: 39121029
- UPC 11: 78347240016
- UPC 12: 783472400164
- Width: 17.90 in
- Width [Metric]: 45.4660 cm
- Stock Status: NONSTOCK
- Brand: SolaHD™
- Manufacturer: Emerson
- Frequency Rating: 60 Hz
- Phase: 3 pH
- Power Rating: 14 kVA
- Primary Voltage: 460 Delta
- Secondary Voltage: 460Y/266
SolaHD Drive Isolation Transformer, Ventilated, 460 VAC Delta Primary, 460Y/266 VAC Secondary, 14 kVA, 60 Hz, 3 Phase, 1, 5% FCAN/1, 5% FCBN Taps, Floor Mount, NEMA 3R, 23 in H x 18 in W x 14 in D
- Applications
- Features
| SCR Variable Speed Drives |
| Isolation minimizes load disturbances caused by the SCR drive. Taps on all units for adjustments to incoming source voltage. Full capacity secondary neutral as required by the NEC. |
| Taps on all units for adjustments to incoming source voltage |
| Full capacity secondary neutral as required by the national electric code |
| Shielding attenuates line to ground noise |
| Isolation minimizes load disturbances caused by the SCR drive |
| A transformer is needed to magnetically isolate the incoming line from the motor drive |
| The transformer must also provide a voltage change to match the required voltage of the SCR drive |
| Standard designs are delta primary and wye secondary to match the common power sources required in most 3-phase rectifier circuits |
| Designed to handle the mechanical stresses, voltage demands and harmonics associated with SCR applications |
| Designed to handle the mechanical stresses, voltage demands and harmonics associated with SCR applications |