Appleton® APL240BU UNILETS™ APL Light Fixture, 2 F40BX Fluorescent Lamp, 120 to 277 VAC, Gray Epoxy Housing
Indoor Ceiling Fixtures
334550
MFG #: APL240BU
Appleton™
2508.10000
/ ea
- ARRA Compliant: N
- Buy American Compliant: N
- Catalog Number: APL240BU
- Country of Origin: MX
- Currency: USD
- Dimensions: 29 in L x 7-3/4 in H
- EU RoHS Indicator: C
- Gross Volume per Pack Metric: 35.05
- Gross Volume UOM Metric: kg
- Gross Weight Per Pack: 35.3500 lb
- Gross Weight per Pack Metric: 16.04
- Gross Weight UOM Metric: kg
- Height: 13.80 in
- Height [Metric]: 35.0520 cm
- Housing Material: Aluminum
- Lamp Base Type: A23/PS25 Medium
- Lamp Wattage: 40 W
- Length: 31.00 in
- Length [Metric]: 78.7400 cm
- Lens Type: Prismatic Glass
- Mounting Type: Ceiling
- Series: APL
- Standard: Class I, Division 1 And 2, Groups C, D; Class II, Division 1 And 2, Groups E, F, G; Class III; UL Listed: E10794, 1598, 844; CSA Certified: 025428, C22.2 No. 250, C22.2 No. 137; Complies With NEC 516-3(b) And NFPA No. 33
- Standards: Class IDivision 12Groups CDClass IIDivision 12Groups EFGClass IIIUL 1598844File No. E10794 ListedCSA C22.2 File No. 250137025428 CertifiedNEC 516-3(b)NFPA File No. 33 Compliant
- Type: Factory Sealed
- UNSPSC: 39111501
- UPC 11: 78138109052
- UPC 12: 781381090520
- Width: 22.60 in
- Width [Metric]: 57.4040 cm
- Stock Status: NONSTOCK
- Brand: Appleton™
- Manufacturer: Appleton
- Housing Finish: Gray Epoxy
- Lamp Type: F40BX Fluorescent
- Voltage Rating: 120 to 277 V
- Number Of Lamps: 2
Appleton® UNILETS™ Light Fixture, Series: APL, 120 to 277 VAC, F40BX Fluorescent Lamp, 40 W Lamp, 2 Lamps, 20000 hr Average Life, Class P Ballast, Ceiling Mount, Aluminium Housing, Gray Epoxy Housing, 29 in L x 7-3/4 in H
- http://www.appletonelec.com(Seller Home Page URL)
- Seller Home Page URL - appleton(Seller Home Page URL)
- Spec Sheet URL - 11043_SPE_781381090520_spec.pdf(Spec Sheet URL)
- Spec Sheet URL - SPE_781381090520_spec.pdf(Spec Sheet URL)
- Tech Drawing URL - appleton-grp-terms-and-conditions.pdf(Tech Drawing URL)
- Warranty URL - 11043_AFRVNTEYP0B9JHS4.pdf(Warranty URL)
- Warranty URL - appleton-grp-terms-and-conditions.pdf(Warranty URL)
- Applications
- Features
For Use In Marine And Wet Locations, Classified Areas Where Ignitable Gases And Vapors, Dusts, Paint Residue, Paint Powder, Or Corrosive Atmospheres May Be Present, Or Where Excessive Moisture Is A Problem, Refineries, Chemical And Petrochemical Plants, Textile Mills, Grain Elevators And Other Grain Processing Facilities, Pharmaceutical Plants, And Paint Spray Areas |
Factory sealed - external seals not required; Easy to install; Three 3/4 IN conduit hubs on each end of fixture, two close-up plugs furnished per end; Mounts straight down or at 45 DEG angle to either side; can be mounted horizontally or vertically on wall; Gasketed end caps remove easily for wiring or relamping; Explosionproof, heat-resistant and impact-resistant glass tubes protect lamps; Cool-operating fluorescent lamps (furnished) provide excellent color rendition and high lumen output per watt; Corrosion resistant; Supplied with energy-saving Class P ballasts, equipped with an automatic thermally activated protective device; Compact size; Uses two single-ended biaxial 40 WTT fluorescent lamps |
Approved for mounting directly inside a paint spray booth, Complies with NEC 516-3(b) and NFPA NO 33 |
Classified areas where ignitable gases and vapors, dusts, paint residue, paint powder or corrosive atmospheres may be present or where excessive moisture is a problem |
Factory sealed fixture, no external seals needed for classified areas |
Easy to install, has three 3/4 in conduit hubs on each end of fixture, two close-up plugs per end are furnished, mounts straight down or at 45 deg angle to either side, can be mounted horizontally or mounted vertically on wall, gasketed end caps remove easily for wiring or relamping |
Cool-operating fluorescent lamps provide excellent color rendition and high lumens output per watt |
Reflector (optional) is designed for efficient distribution |
Appleton® APL fixtures are supplied with energy saving class P ballasts, equipped with an automatic thermally activated protective device |
Explosionproof, dust-ignition proof |
Copper free aluminum material |
Factory sealed |
Installs and removes using only a screwdriver |
Easily mount to globe ring with 3 screws |
Epoxy clad powder coat housing finish |
Globe ring with 3 screws mounting |
Without guard |