TPI E3312TSRPW 3310 1-Phase Standard Fan Forced Wall Heater With In-Built Single Pole Thermostat and Summer Fan Switch, 3413 Btu
Circulation Heaters
943404
MFG #: E3312TSRPW
TPI
447.68000
/ ea
- Amperage Rating: 8.3 A
- Application: Indoor-Commercial/Residential
- ARRA Compliant: Y
- Buy American Compliant: Y
- Catalog Number: E3312TSRPW
- Color: White
- Country of Origin: US
- Currency: USD
- Dimensions: 14-3/16 in W x 4 in D x 19-15/16 in H
- EU RoHS Indicator: N
- Finish: Powder Coated
- Flow Rate: 175 cfm
- Gross Weight Per Pack: 22.0000 lb
- Gross Weight per Pack Metric: 9.98
- Gross Weight UOM Metric: kg
- Height: 6.00 in
- Height [Metric]: 15.2400 cm
- Housing Material: Steel
- Length: 21.00 in
- Length [Metric]: 53.3400 cm
- Material: Steel
- Maximum Operating Temperature: 90 (Thermostat) DEG F
- Model: E3312TSRPW
- Mounting: WALL
- Mounting Type: Wall
- Phase: 1
- Power Rating: 1 kW
- Series: 3310
- Speed: 600 rpm
- Standard: cETLus Listed
- Standards: ARRA CompliantBuy American Act CompliantcETLus Listed
- Temperature Rating: 90 °F
- Type: 1-Phase Fan Forced
- UNSPSC: 40101809
- UPC 11: 68633438259
- UPC 12: 686334382595
- Voltage Rating: 120 VAC
- Wattage: 1,000 W
- Width: 17.00 in
- Width [Metric]: 43.1800 cm
- Stock Status: NONSTOCK
- Brand: TPI
- Manufacturer: TPI
TPI Fan Forced Wall Heater, 1-Phase Standard, Series: 3310, 3413 Btu, 120 VAC, 8.3 A, 1000 W, 175 cfm, 600 rpm, 90 deg F, Wall Mount, Steel, White, Powder Coated, 19-15/16 in H x 14-3/16 in W x 4 in D
- Applications
- Features
| Indoor-Commercial/Residential |
| Features: Automatic Reset Thermal Limit;Summer Fan Switch;In-Built Single Pole Thermostat;Manufactured in U.S.A.; Btu Rating: 1000; Amperage Rating: 8.3 AMP; Air Flow: 175 CFM; Finish: Powder Coated; Color: White; Series: 3310 |
| Powder coated 18 ga steel front |
| Automatic reset thermal limit for safety |
| Steel block fin element |
| Units with dual wattage, factory wired to highest wattage |
| Wattage selectable at time of installation on some models |
| Furnish and install electric forced air heaters where specified |
| The heaters shall be constructed of a heavy gauge steel housing |
| The heaters shall have a low speed 600 rpm motor which drives a vane axial blower to deliver a quiet 175 cfm of down flow air |
| The heating element shall be of the sealed block fin type with large, parallel steel fins for quick heat transfer |
| Unit shall have a standard thermal overload cutoff for added safety, a fan switch for fan only operation |
| The in-built thermostat shall be calibrated to provide a range of 0 to 110 deg F |
| The in-built thermostat shall be calibrated to provide a range of 0 to 110 deg F |
| The in-built thermostat shall be calibrated to provide a range of 0 to 110 deg F |