Banner Engineering T30UXUAQ8 U-Gage™ T30UX Temperature Compensation Proximity Level Sensor, 100 to 1000 mm, 45 ms Response Time

Ultrasonic Reflex-Reflective - Block
680784 MFG #: T30UXUAQ8
BANNER®
429.11000 / ea
Banner_Engineering_T30UINAQ
  • Application: For Security Purpose
  • Catalog Number: T30UXUAQ8
  • Connection: 4-Pin Euro-Style Integral Quick Disconnect
  • Country of Origin: UKN
  • Enclosure: IEC IP65, NEMA 6P, PBT Polyester Housing, Polyester Push Buttons, Epoxy/Ceramic Composite Transducer
  • Environmental Conditions: Relative Humidity: 95 PCT At 50 ° C (Non-Condensing)
  • Frequency Response: 224
  • Gross Weight Per Pack: 1 lb
  • Model: T30UX
  • Output: Analog Voltage Output: 2.5 KOHM Minimum Load Resistance, Minimum Supply For A Full 10 V Output Is 12 VDC, Analog Current Output: 1 KOHM Maximum At 24 V Input
  • Resolution: 0.1 PCT Of Distance (0.5 MM Minimum)
  • Sensing Distance: 100 - 1000 C
  • Size: 51-1/2 MM Height X 40 MM Width X 45 MM Depth
  • Standards: CE Marked, CSA Certified, Meets IEC 60947-5-2 Requirements
  • Sub Brand: U-Gage
  • Temperature Rating: -40 to 70 °C
  • Type: Teach Mode Ultrasonic Sensor
  • UNSPSC: 41111960
  • UPC 11: 66248880465
  • UPC 12: 66248880465
  • Voltage Rating: 10 - 30 V
  • Stock Status: NORMALLY STOCKED
  • Brand: BANNER®
  • Manufacturer: Banner Engineering Corp.
  • Response Time: 45 MS (Fast), 105 MS (Slow)
The U-GAGE® T30UX is an easy-to-use ultrasonic sensor with extended range and built-in temperature compensation. Simple push button configuration provides flexibility for a variety of applications. Easy-to-see indicator LEDs communicate the status of the sensor. The Green "Power" LED ON indicates that the sensor is in Run Mode (the sensor's normal operating condition). The Red "Signal" LED indicates the target signal strength. The Amber "Output" LED indicates that the output is enabled and the sensor is receiving a signal within the window limits. The Amber "Mode" LED indicates the currently selected mode(fast or slow).
QTY
Add to Wishlist
  • Applications
  • Features
For Security Purpose
Fast, easy-to-use Teach-mode programming, no potentiometer adjustments; Built-in temperature compensation; Configure with either a positive or negative analog output slope; Remote TEACH for security and convenience; Compact, self-contained, right-angle sensor package with fully encapsulated electronics; Resists harsh environments with rugged IP67 (NEMA 6) housing and fully encapsulated electronics; Push-button and remote Teach-mode programming with an external switch, computer or controller for added security and convenience; Protected against reverse polarity and transient voltages; Protected against short circuit conditions; All models meet MIL standard 202F requirements method 201A; The temperature warmup drift upon power-up is less than 1 PCT of the sensing distance; 0.02 PCT of distance/° C temperature effect; 0.25 PCT of distance linearity; Loss of signal
Built-in temperature compensation
Fast, easy-to-use Teach-mode programming, no potentiometer adjustments
Configure with either a positive or negative analog output slope
Remote teach for security and convenience
Compact, self-contained, right-angle sensor package with fully encapsulated electronics
Protected against reverse polarity and transient overvoltage's
Protected against short circuit conditions
PBT polyester housing, polyester push buttons, epoxy/ceramic composite transducer
30 mm diameter barrel housing
Time of flight sensing mode
Teach button adjustments
Clear object detection
0 to 10 VDC analog output configuration
0.1% of distance (0.5 mm minimum) analog resolution
500 ms delay at power-up
0.02% of sensing distance/deg C temperature effect
30G 11 ms duration, half sine wave mechanical shock
<1.6 V at 100 mA NPN/<3 V at 100 mA PNP output saturation voltage
2.5 kOhm minimum load impedance analog voltage output
100 mA maximum discrete (switched) output