Banner Engineering Multi-Beam® R2PBA 2-Wire Power Block, Photoelectric Sensor, 105 to 130 VAC, SPST Solid State Output
Sensor Power Blocks, Bases & Receptacles
159458
MFG #: R2PBA
BANNER®
167.71000
/ ea
- Catalog Number: R2PBA
- Connection Type: Cable
- Country of Origin: USA
- Environmental Conditions: -40 to 70 deg C Operating Temperature
- Gross Weight Per Pack: 1 lb
- Standards: CE Marked, CSA Approval, cULus Listed
- Suitable For Use With: Multi-Beam® Modularized Photoelectric Sensors
- Type: 2-Wire
- UNSPSC: 39121004
- UPC 11: 66248826485
- UPC 12: 66248826485
- Stock Status: NONSTOCK
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Output Type: SPST Solid State
- Sensor Type: Photoelectric
- Voltage Rating: 105 to 130 VAC
Power block models R2PBA and R2PBB both offer the simplicity of wiring which is associated with 2-wire sensor design. They wire directly in series with an ac load, exactly like a limit switch. Use of a 2-wire power block requires programming of the sensor head to the "2W" (2-wire) operating mode. As a result, MAXI-BEAM sensing response time is fixed at 10 milliseconds for 2-wire operation. There are some hookup considerations which are unique to 2-wire interfaces.
- Features
| This model offer the simplicity of wiring which is associated with 2-wire sensor design; They wire directly in series with an AC load, exactly like a limit switch; Use of a 2-wire power block requires programming of the sensor head to the 2W (2-wire) operating mode; As a result, MAXI-BEAM sensing response time is fixed at 10 MS for 2-wire operation; Contain an output switch for interfacing to loads or to control circuitry; include status LEDs which continuously indicate the state of the output circuit and input power; Epoxy-encapsulated and rated for -40 to +70 ° C" |
| 50/60 Hz, 2 W exclusive of load input |
| 3/4 A maximum (derated to 1/2 A at 70 deg C) output |
| 10 A for 1 sec non-repeating maximum inrush |
| 5.2 V RMS at a 1/2 A load, 14 V RMS at a load of 10 mA on-state voltage drop |
| Less than 1.7 mA (resistive or inductive load) off-state leakage current |
| Range depends on sensor |
| Wiring chamber |
| 2 m length cable connection |