Banner Engineering S12SN6R S12 Photoelectric Sensor, Barrel Shape, 15000 mm Sensing, Visible Red Sensing Beam, NPN Output
Thru-Beam, Tubular Style Receiver
132472
MFG #: S12SN6R
BANNER®
83.39000
/ ea
- Amperage Rating: 20 A
- Application: For Use With S12 Series Photoelectric Sensor Emitter
- Catalog Number: S12SN6R
- Connection: 2 MR Cable
- Country of Origin: USA
- Enclosure: IEC IP67 NEMA 6P Thermoplastic Polyester
- Environmental Conditions: 90 PCT At 50 ° C Relative Humidity, Shock: Meets method 213B conditions H&I, 75G With Unit Operating, 100G For Non-Operation
- Gross Weight Per Pack: 1 lb
- Leakage Current: Off-State Output: Less Than 1 MICAMP
- Lens: POLYCARBONATE
- Operating Temperature: -40 To 70
- Output: NPN, 100 MILAMP, ON-State Saturation Voltage: Less Than 1 V At 10 MILAMP DC And Less Than 1.5 V At 150 MILAMP DC
- Size: 12 MM Diameter X 64 MM Length Barrel
- Standards: CE Approval
- Type: Opposed Mode Receiver
- UNSPSC: 39121528
- UPC 11: 66248835410
- UPC 12: 66248835410
- Vibration: 10 - 60 HZ Maximum, Double Amplitude 0.06 IN, Maximum Acceleration 10G
- Voltage Rating: 10 - 30 V
- Stock Status: NONSTOCK
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Response Time: 3 ms On/1.5 ms Off
- Sensing Beam: 680 NMTR Visible Red LED
- Sensing Range: 15 A
Banner Engineering Photoelectric Sensor, Series: S12, Barrel, Opposed Sensing Method, 15000 mm Sensing Range, Visible Red Sensing Beam, 3/1.5 ms Response, NPN Output, 10 to 30 VDC, 4-Pin Cable, LED Light Source, NEMA 6P/IP67, -40 to 70 deg C Operating, Environmental Conditions: 90% at 50 deg C Relative Humidity
- Applications
- Features
For Use With S12 Series Photoelectric Sensor Emitter |
Barrel housing style; One output may be used as a marginal signal alarm; LED indications for power on, output overload, object sensed, and low gain conditions; Protected against reverse polarity and transient voltages |
Thermoplastic housing material |
Receiver sensing mode (detailed) |
Light/dark operate |
375 us repeatability |
100 ms delay at power-up |
4-pins 2 m cable length connection |
12 mm barrel diameter |
Health/marginal signal output |
Solid-state DC switch output |
Polycarbonate lens material |
4-pin 2 m length cable connection |