Banner Engineering S18AW3FF100Q1 EZ-BEAM S18 SE
Photoelectric Specialty Sensors
133835
MFG #: S18AW3FF100Q1
BANNER®
159.28000
/ ea
- Amperage Rating: 750m A
- Catalog Number: S18AW3FF100Q1
- Connection: 4-Pin Micro-Style Quick Disconnect
- Country of Origin: USA
- Enclosure: IP69K NEMA 6P Thermoplastic Polyester
- Environmental Conditions: 90 PCT At 50 ° C Relative Humidity
- Gross Weight Per Pack: 1 lb
- Leakage Current: Off-State Output: Less Than 100 MICAMP
- Lens: Acrylic
- Operating Temperature: -40 To 70
- Output: SPST 3-Wire Solid-State AC Switch, Derate 5 MILAMP/° C Above 50 ° C; Inrush Capability: 1 AMP For 20 MS (Non-Repetitive); ON-State Saturation Voltage: 3 V At 300 MILAMP AC And 2 V At 15 MILAMP AC
- Size: 16.6 MM Diameter X 104.1 MM Length Barrel
- Type: S18 Series Self-Contained Fixed Field Mode Photoelectric Sensor
- UNSPSC: 39121528
- UPC 11: 66248833691
- UPC 12: 66248833691
- Vibration: 10 - 60 HZ Maximum, Double Amplitude 0.06 IN, Maximum Acceleration 10G
- Voltage Rating: 20 - 250 V
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Response Time: 16
- Sensing Beam: 880 NMTR Infrared LED
- Sensing Range: 100 A
EZ-BEAM S18 Series Self-Contained Fixed Field Mode Photoelectric Sensor,20 - 250 VAC,Average: 20 MILAMP, Peak: 750 MILAMP,Sensing Range: 100 MM,880 NMTR Infrared LED Sensing Beam,Output: SPST 3-Wire Solid-State AC Switch, Derate 5 MILAMP/DEG C Above 50 DE
- Features
| Protected against transient voltages; Output protection circuitry: Protected against false pulse on power-up |