Lithonia Lighting® NPODM2PDXWH NPODM Network Wall Pod, <5 mA, 2 Poles, White
Digital Meter - Various Inputs
892088
MFG #: NPODM2PDXWH
SensorSwitch™
123.55000
/ ea
- Amperage Rating: <5 mA
- Catalog Number: NPODM2PDXWH
- Color: White
- Control: Pushbutton
- Country of Origin: MX
- Dimensions: 2.74 in H x 1.68 in W x 1.63 in D
- Finish: Gloss
- Gross Weight Per Pack: 0.30 lb
- Mounting Type: Wall
- Operation Mode: ON/OFF + Raise/Lower
- Series: NPODM
- Standards: UL Listed
- Temperature Rating: 0 to 60 °C
- Type: 2-Channel
- UNSPSC: 39121107
- Stock Status: NORMALLY STOCKED
- Brand: SensorSwitch™
- Manufacturer: Acuity Brands
The nPODM xS Series WallPods are single gang nLight-enabled devices that provide one, two, and four scene control. These units provide a convenient method of selecting a custom lighting control scene for the room in which it is installed, or requesting a global profile scene be run across several remote zones. By default, however, the buttons of an nPODM xS are configured as on/off toggle switches. Scenes are programmed to these units utilizing available SensorView software. The nPODM xS has soft-click push-buttons with a green LED indicator for each button. These button are field replaceable and can be custom engraved. Two RJ-45 connectors allow the nPODM xS to be daisy-chain wired with CAT-5e cabling to other nLight network devices. The nPODM xSB offers individual on/off buttons for each scene. Pressing the "on" button will reset the expiration time of a scene back to the original programmed time. In order to utilize a blink warning, system gateway and additional programming is required. nPODM xSB WallPods are not recommended for use with "preset" style scenes.
- http://www.lithonia.com(WEB SELLER HOME PAGE URL)
- WEB BROCHURE URL - Lithonia_Lighting_NPODM_2P_DX_WH_Brochure.pdf(WEB BROCHURE URL)
- WEB INSTALL INSTR URL - Acuity_Brands_NPODM_2P_DX_IV_Installation.pdf(WEB INSTALL INSTR URL)
- WEB SPEC SHEET URL - NPODM.PDF(WEB SPEC SHEET URL)
- WEB WARRANTY URL - terms-and-conditions(WEB WARRANTY URL)
- Features
The nPODM xS Series WallPods are single gang nLight-enabled devices that provide one, two, and four scene control. These units provide a convenient method of selecting a custom lighting control scene for the room in which it is installed, or requesting a profile be run across several remote zones. By default, however, the buttons of an nPODM xS are configured as on/off toggle switches.The nPODM xS has soft-click push-buttons and has a green LED indicator for each button. These button are field replaceable and can be custom engraved. Two RJ-45 connectors allow the nPODM xS to be daisy-chain wired with CAT-5 cabling to other nLight network devices. |
On/off + raise/lower control dimming |
Standard dynamic |
Standard humidity |
Available with 2S and 4S versions |
RJ45 ports network connection |
Communicates with nLight® network |
Remotely configurable |
Runs locally stored scenes or global scenes |
Programmable to initiate occ. sensor time delay sweep |
Dynamic options for custom button names when pairing with Acuity brands nTUNE fixtures |
Capable of programming 4 different scene types |
Expiration timer programmable to each scene |
Single gang switch box or low voltage ring mounting |
Dual on-off action |
Push button actuator |