Rees 40102-102 Heavy Duty Mushroom and Rope Pull Operator, 30.5 mm, Red

Non-Illuminated Push-Pull Operators
11895 MFG #: 40102-102
Rees
192.78000 / ea
  • Contact Mode: Maintained
  • Contact Rating: 6 A at 110 to 120 VAC, 3 A at 220 to 240 VAC, 1.5 A at 440 to 480 VAC, 1.2 A at 550 to 600 VAC, 2.2 A at 115 to 125 VDC, 1.1 A 230 to 250 VDC
  • Country of Origin: USA
  • Enclosure Type: NEMA 12/13/IP65
  • Finish: Zinc Plated
  • Material: Plastic
  • Operator Type: Mushroom Plunger
  • Standards/Approvals: CE Certified|CSA Certified|IEC/EN 60947-5-1/60947-5-5 - 3.9|UL File No. E58589
  • Stock Status: Scheduled Items
  • Temperature rating: 0 to 55 deg C
  • Type: Heavy Duty
  • UOM: lb
  • Weight: 0.8500
  • Brand Name: Rees
  • Manufacturer: REES, Inc.
  • Size: 30.5 mm
  • Contact Configuration: 1NO-1NC
  • Color: Red
The following switch is a hand operated, control circuit device, rated Heavy Duty normally for use with electromagnetic equipment. The body is made from die-cast zinc. The red mushroom ergonomic shaped plunger is molded from DuPont Delrin 100ST Acetyl for improved impact resistance and is solid color throughout. The operator will accept up to three tiers of two contact blocks for a total of six separate circuits. Each operator is supplied with all mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of this unit is 1,000,000 operations. This device can be found on a variety of machinery, used to perform such operations as stop, top stop, off, forward, reverse, etc. This series satisfies the requirements of IEC 60947-5-5 - 3.9 direct opening action (positive opening action) (of a contact element); when fitted with one or more of any of our normally closed contact blocks. This is commonly referred to as "Positive Break", meaning the breaking of the normally closed contacts is not dependent upon springs.
QTY
  • Applications
  • Features
For used on a variety of machinery used to perform such operations as 'Stop', 'Top Stop', 'Off', 'Forward', 'Reverse'
8 lb operating force
Gold plated contacts eliminate high resistance tarnishing
The following switch is a hand operated, control circuit device, rated 'Heavy Duty - A600/N150' normally for use with electromagnetic equipment; The body is made from die-cast zinc; The red mushroom ergonomic shaped plunger is molded from DuPont Delrin 100ST Acetal for improved impact resistance and is solid color throughout; Positive break, gold plated contacts; Sliding padlock attachment; The operator will accept up to three tiers of two contact blocks for a total of six separate circuits; Each operator is supplied with all mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation; This series satisfies the requirements of IEC 60947-5-5 - 3.9 direct opening action (positive opening action) (of a contact element); when fitted with one or more of any of our normally closed contact blocks; This is commonly referred to