Banner Engineering T18SP6DQ Ez-Beam® T18 Photoelectric Sensor, Rectangular Shape, 500 mm Sensing, Infrared Sensing Beam

Photoelectric Diffuse Mode Sensors
132408 MFG #: T18SP6DQ
Banner
70.00000 / ea
  • Amperage Rating: 25 mA
  • Connection Type: Quick-Disconnect
  • Country of Origin: USA
  • Enclosure Type: NEMA 6P/IP69K
  • Environmental Conditions: 90% at 50 deg C
  • Light Source: LED
  • Operating Temperature: -40 to 70 deg C
  • Output Type: PNP
  • Response Time: 3 ms
  • Sensing Beam: Infrared
  • Sensing Method: Diffuse
  • Sensing Range: 500 mm
  • Series: T18
  • Shape: Rectangular
  • Size: 30.1 mm L x 30.1 mm W x 53.7 mm H
  • Standards/Approvals: CE Marked|CSA Certified|cULus Listed|Meets MIL-STD-202F Requirements|RoHS Compliant
  • Stock Status: Normally Stocked
  • UOM: lb
  • Vibration: 10 to 60 Hz
  • Voltage Rating: 10/30 VDC
  • Weight: 1
  • Brand Name: Banner
  • Manufacturer: Banner Engineering
Banner Engineering Ez-Beam® Photoelectric Sensor, Series: T18, Rectangular, Diffuse Sensing Method, 500 mm Sensing Range, Infrared Sensing Beam, 3 ms Response, PNP Output, 10/30 VDC, 25 mA, Quick-Disconnect, LED Light Source, 10 to 60 Hz, 30.1 mm L x 30.1 mm W x 53.7 mm H, NEMA 6P/IP69K, -40 to 70 deg C Operating, Environmental Conditions: 90% at 50 deg C
QTY
  • Features
Featuring EZ-BEAM technology to provide reliable sensing without the need for adjustments (most models)
T style plastic housing with 18 mm threaded lens mount
Completely epoxy-encapsulated barrel-mount sensors operate on dc supply voltage and withstand harsh sensing environments
Advanced diagnostics to warn of marginal sensing conditions or output overload
10 - 60 Hz maximum, double amplitude 0.06 in, acceleration 10G vibration
Innovative dual-indicator system takes the guesswork out of sensor performance monitoring
2 green and yellow LED indicators, green on steady - power to sensor is on, green flashing: output is overloaded, yellow on steady - N.O. output is conducting , yellow flashing - excess gain marginal (1 - 1.5x) in light condition
Non-polarized retro and diffuse models (only) have a single-turn rear-panel sensitivity control (turn clockwise to increase gain) adjustments
Protected against reverse polarity and transient voltages
Protected against false pulse on power-up and continuous overload or short circuit of outputs
150 mA maximum (each) in standard wiring, less than 1 V at 10 mA dc, less than 1.5 V at 150 mA dc on-state saturation voltage
T18 series self-contained diffuse mode photoelectric sensor
Less than 1 uA at 30 VDC off-state output leakage
3 ms on/off response time
880 nm infrared LED sensing beam
Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity
4-pin euro-style quick disconnect connection
PBT polyester enclosure
Light/dark operate
18 mm barrel diameter, Self-Contained
Barrel housing style; Protected against reverse polarity and transient voltages; Protected against false pulse on power-up and continuous overload or short circuit of outputs