Banner Engineering QS30EDVQ World-Beam® QS30E Photoelectric Sensor, Rectangular Shape, 1.4 m Sensing, Visible Red Sensing Beam

Photoelectric Diffuse Mode Sensors
387241 MFG #: QS30EDVQ
Banner
145.00000 / ea
  • Amperage Rating: 25 mA
  • Connection Type: Quick-Disconnect
  • Country of Origin: USA
  • Enclosure Type: NEMA 6/IP67
  • Environmental Conditions: 95% at 50 deg C
  • Light Source: LED
  • Operating Temperature: -10 to 55 deg C
  • Output Type: Bi-Polar
  • Response Time: 1.8 ms
  • Sensing Beam: Visible Red
  • Sensing Method: Diffuse
  • Sensing Range: 1.4 m
  • Series: QS30E
  • Shape: Rectangular
  • Size: 22 mm L x 33 mm W x 56.8 mm H
  • Stock Status: Normally Stocked
  • UOM: lb
  • Vibration: 10 to 60 Hz
  • Voltage Rating: 10/30 VDC
  • Weight: 1
  • Brand Name: Banner
  • Manufacturer: Banner Engineering
Banner Engineering World-Beam® Photoelectric Sensor, Series: QS30E, Rectangular, Diffuse Sensing Method, 1.4 m Sensing Range, Visible Red Sensing Beam, 1.8 ms Response, Bi-Polar Output, 10/30 VDC, 25 mA, Quick-Disconnect, LED Light Source, 10 to 60 Hz, 22 mm L x 33 mm W x 56.8 mm H, NEMA 6/IP67, -10 to 55 deg C Operating, Environmental Conditions: 95% at 50 deg C
QTY
  • Features
Smart power-control algorithm to maximize performance in low-contrast applications
Easy push-button dark operate/light operate select, output off-delay, and operating speed setup
Normal mode provides 1.8 ms sensing response with improved crosstalk avoidance routine (for two sensors) and improved fluorescent light immunity
Compact housing, mounting versatility - via popular 30 MM threaded barrel or side-mount
Selectable 30 ms off-delay
Easy-to-read operating status indicators, with 8-segment bar graph display
Teach button adjustments
Protected against reverse polarity and transient over voltages
Protected against output short-circuit, continuous overload, transient over-voltages, and false pulse on power up
10 - 60 Hz maximum, double amplitude 0.06 in, maximum acceleration 10 gohm vibration
150 mA maximum load, less than 200 mV at 10 mA and less than 1V at 150 mA maximum load (NPN), less than 1.25 V at 10 mA and less than 2 V at 150 mA(PNP) ON-state saturation voltage
QS30 series expert diffuse mode photoelectric sensor
Less than 50 uA at 30 VDC off-state output leakage
0.3 ms (high-speed mode), 1.8 ms (normal mode) response time
660 nm powerful, highly collimated visible red sensing beam
Acrylic lens, 95 percent at 55 deg C (non-condensing) relative humidity
5-pin integral euro-style quick disconnect connection
ABS thermoplastic enclosure
Light/dark operate, bipolar (NPN and PNP) output
30 mm barrel diameter
Rectangular with M30 barrel housing style; Easy-to-set automatic expert-style static and dynamic TEACH options, multiple single-point set options, plus manual adjustment for fine tuning; Smart power-control algorithm to maximize performance in low-contrast applications; Easy-to-read operating status indicators, with 8-segment bar graph display; Powerful, highly collimated visible red sensing beam; Compact housing, mounting versatility - via popular 30 MM threaded barrel or side-mount; Protected against reverse polarity, over voltage, and transient voltages; Protected against output short-circuit, continuous overload, transient over-voltages, and false pulse on power up