Banner Engineering SM312FVQD SM312 Fiber Optic Sensor, Rectangle Shape, Visible Red Sensing Beam, 1 ms Response Time

Fiber Optic Block Style Sensors
13533 MFG #: SM312FVQD
116.00000 / ea
  • Connection Type: 4-Pin M12 Quick Disconnect
  • Country of Origin: USA
  • Enclosure Type: NEMA 1/2/3/3S/4/4X/6/12/IP67
  • Environmental Conditions: 90% at 50 deg C Maximum Relative Humidity
  • Light Source: LED
  • Operating Temperature: -20 to 70 °C
  • Output Type: Single Discrete NPN/PNP
  • Response Time: 1 ms
  • Sensing Beam: Visible Red
  • Sensing Method: Glass Fiber Optic
  • Series: SM312
  • Shape: Rectangle
  • Standards/Approvals: CE Marked, CSA Approval, UL Approval
  • Stock Status: Normally Stocked
  • UOM: lb
  • Voltage Rating: 10 to 30 VDC
  • Weight: 1
  • Brand Name: Banner
  • Manufacturer: Banner Engineering
Banner Engineering Fiber Optic Sensor, Series: SM312, Rectangle, Glass Fiber Optic Sensing Method, Visible Red Sensing Beam, 1 ms Response, Single Discrete NPN/PNP Output, 10 to 30 VDC, 4-Pin M12 Quick Disconnect, LED Light Source, NEMA 1/2/3/3S/4/4X/6/12/IP67, -20 to 70 deg C Operating, Environmental Conditions: 90% at 50 deg C Maximum Relative Humidity
  • Features
Thermoplastic primary housing material
300 us repeatability
Gain (sensitivity) adjustment screw
Alignment indicator device
Light/dark operate select switch
Clockwise light operate (outputs conduct when sensing light is received)
Counter clockwise dark operate (outputs conduct when sensing light is not received)
4-pin M12/euro style quick disconnect cable connection
Potentiometer adjustment
100 ms delay at power-up
4-pin M12 integral quick disconnect cable connection
Compact, modulated, highly repeatable sensors; Switch-selectable for light operate or dark operate; Includes banner's exclusive AID™ alignment system; Sensing range varies by sensing mode and fiber optics used; Rugged, epoxy-encapsulated, totally encapsulated, O-ring sealing, and stainless steel screws construction; Physically and electrically interchangeable with 18 MM barrel-type photoelectric; Protected against reverse polarity, transient voltages and against false pulse on power-up and continuous overload or short-circuit of outputs; Controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cover; The NPN (current sinking) output of DC MINI-BEAM sensors is directly compatible as an input to banner logic modules, including all non-amplified MAXI-AMP and MICRO-AMP modules, MINI-BEAMs are TTL compatible