Banner Engineering D12SP6FPQ D12 High Speed Fiber Optic Sensor, Rectangle Shape, Visible Red Sensing Beam, 0.5 ms Response Time

Fiber Optic Block Style Sensors
137993 MFG #: D12SP6FPQ
Banner
171.00000 / ea
  • Amperage Rating: 45 mA
  • Connection Type: Pigtail Quick Disconnect
  • Country of Origin: USA
  • Enclosure Type: NEMA 2/IP11
  • Environmental Conditions: 90% at 50 deg C
  • Light Source: LED
  • Mounting Type: DIN Rail
  • Operating Temperature: -20 to 70 deg C
  • Output Type: PNP
  • Response Time: 0.5 ms
  • Sensing Beam: Visible Red
  • Series: D12
  • Shape: Rectangle
  • Size: 64 mm L x 12 mm W x 35.5 mm H
  • Standards/Approvals: CE Marked, cULus Listed , RoHS Complaint
  • Stock Status: Normally Stocked
  • Type: High Speed
  • UOM: lb
  • Voltage Rating: 10 to 30 VDC
  • Weight: 1
  • Brand Name: Banner
  • Manufacturer: Banner Engineering
Banner Engineering Fiber Optic Sensor, High Speed, Series: D12, Rectangle, Visible Red Sensing Beam, 0.5 ms Response, PNP Output, 10 to 30 VDC, 45 mA, Pigtail Quick Disconnect, LED Light Source, 64 mm L x 12 mm W x 35.5 mm H, NEMA 2/IP11, -20 to 70 deg C Operating, DIN Rail Mount, Environmental Conditions: 90% at 50 deg C
QTY
  • Applications
  • Features
For use with banner glass and cut-to-length plastic fiber optics
35 mm DIN rail high power fiber optic sensors
Less than 10 uA at 30 VDC off-state leakage current
0.5 ms on/off response time
680 nm visible red LED sensing beam
Acrylic lens cover, 90 deg at 50 deg C (non-condensing) relative humidity
6 in pigtail with 4-pin pico-style quick disconnect connection
0.13 ms repeatability
Less than 1 V at 10 mA DC and less than 1.5 V at 150 mA DC on-state saturation voltage
150 mA maximum (continuous) load
Light/dark operate, complementary PNP control output
Black ABS (Cycolac KJB) housing
False pulse protection circuit causes a 0.1 sec delay on power-up
Plastic fiber
15-turn slotted brass screw, clutched at both ends of adjustment
Two top-mounted LED indicators, green LED lights for DC power On, yellow LED lights for normally open output conducting, seven segment red LED moving-dot bargraph indicates received signal strength, output overload, and marginal excess gain, flashing led corresponds to the "on" state of the alarm
Protected against reverse polarity and inductive load transients
LED indicators for power On and N.O Output Conducting; Protected against reverse polarity and inductive load transients; Black (Cycolac® KJB) construction with acrylic cover