Banner Engineering D12SP6FPHQ D12FPH High Speed Fiber Optic Sensor, Rectangle Shape, Visible Red Sensing Beam, PNP Output

Fiber Optic Block Style Sensors
142228 MFG #: D12SP6FPHQ
Banner
171.00000 / ea
  • Amperage Rating: 45 mA
  • Connection Type: Pigtail Quick Disconnect
  • Country of Origin: UA
  • Enclosure Type: NEMA 2/IP11
  • Environmental Conditions: 90% at 50 deg C
  • Light Source: LED
  • Mounting Type: DIN Rail
  • Operating Temperature: -20 to 70 deg C
  • Output Type: PNP
  • Response Time: 0.5 ms
  • Sensing Beam: Visible Red
  • Series: D12FPH
  • Shape: Rectangle
  • Size: 64 mm L x 12 mm W x 35.5 mm H
  • Standards/Approvals: CE Marked, cULus Listed
  • Stock Status: Normally Stocked
  • Type: High Speed
  • UOM: lb
  • Voltage Rating: 10 to 30 VDC
  • Weight: 1
  • Brand Name: Banner
  • Manufacturer: Banner Engineering
Banner Engineering Fiber Optic Sensor, High Speed, Series: D12FPH, Rectangle, Visible Red Sensing Beam, 0.5 ms Response, PNP Output, 10 to 30 VDC, 45 mA, Pigtail Quick Disconnect, LED Light Source, 64 mm L x 12 mm W x 35.5 mm H, NEMA 2/IP11, -20 to 70 deg C Operating, DIN Rail Mount, Environmental Conditions: 90% at 50 deg C
QTY
  • Applications
  • Features
For use with banner glass and cut-to-length plastic fiber optics
35 mm DIN rail high power fiber optic sensors
Less than 10 uA at 30 VDC off-state leakage current
0.5 ms on/off response time
660 nm visible red LED sensing beam
Acrylic lens cover, 90 deg at 50 deg C (non-condensing) relative humidity
6 in pigtail with 4-pin pico-style quick disconnect connection
0.13 ms repeatability
Less than 1 V at 10 mA DC and less than 1.5 V at 150 mA DC on-state saturation voltage
150 mA maximum (continuous) load
Light/dark operate, complementary PNP control output
Black ABS (Cycolac KJB) housing
False pulse protection circuit causes a 20 ms delay on power-up
Plastic fiber
15-turn slotted brass screw, clutched at both ends of adjustment
Two top-mounted LED indicators, green LED lights for DC power On, yellow LED lights for normally open output conducting, seven segment red LED moving-dot bargraph indicates received signal strength, output overload, and marginal excess gain, flashing led corresponds to the "on" state of the alarm
Protected against reverse polarity and inductive load transients