Banner Engineering D10DPFPQ D10 Fiber Optic Sensor, Rectangle Shape, Visible Red Sensing Beam, 0.05 ms Response Time, PNP Output
Fiber Optic Block Style Sensors
138230
MFG #: D10DPFPQ
Banner
265.22000
/ ea
- Connection Type: Cable
- Country of Origin: USA
- Enclosure Type: NEMA 1/IP50
- Environmental Conditions: 90% at 50 deg C Maximum Relative Humidity
- Light Source: LED
- Mounting Type: DIN Rail
- Operating Temperature: -10 to 55 ° C
- Output Type: PNP
- Response Time: 0.05 ms
- Sensing Beam: Red Laser
- Series: D10
- Shape: Rectangular
- Standards/Approvals: CE Marked, UL Listed
- Stock Status: Normally Stocked
- UOM: lb
- Voltage Rating: 12 to 24 VDC
- Weight: 1
- Brand Name: Banner
- Manufacturer: Banner Engineering
Banner Engineering Fiber Optic Sensor, Series: D10, Rectangle, Visible Red Sensing Beam, 0.05 ms Response, PNP Output, 12 to 24 VDC, Cable, LED Light Source, NEMA 1/IP50, -10 to 55 deg C Operating, DIN Rail Mount, Environmental Conditions: 90% at 50 deg C Maximum Relative Humidity
- bannerengineering.com(WEB SELLER HOME PAGE URL)
- WEB BROCHURE URL - 64154.pdf(WEB BROCHURE URL)
- WEB COMPLIANCE CERT URL - Banner_D10INFPG_Compliance_Certificate.pdf(WEB COMPLIANCE CERT URL)
- WEB SPEC SHEET URL - SPE_64154.pdf(WEB SPEC SHEET URL)
- WEB TECH DRAWING URL - DRW_156681_pdf.pdf(WEB TECH DRAWING URL)
- WEB WARRANTY URL - WAR_product-warranty.pdf(WEB WARRANTY URL)
- Features
Easy-to-set automatic expert-style teach options including static, dynamic, and single point programming plus manual adjustment for fine tuning |
16-bit microcontroller and 12-bit Analog-to-Digital converter for high-performance, low contrast sensing |
Easy-to-read 4-digit display for teach and signal strength readout, plus indicators for a continuous readout of operating status |
Four-mode power and speed selection with automatic crosstalk avoidance circuitry |
Selectable off-delay options |
Gate input wire can be used to selectively inhibit sensor outputs from switching |
Visible red (680 N-m sensing beam |
2 m cable connection |
Sleek, ultra-slim 10 mm housing, mounts to a standard 35 mm DIN rail |
0 |