Schneider Electric Lexium 32 LXM32AD18N4 Motion Servo Drive, 208/480 VAC, 4.5/7.2/6/6.2 A, 50/60 Hz, 1.8 kW

Servo Controller
730188 MFG #: LXM32AD18N4
Square D™
1765.99000 / ea
  • Amperage Rating: 4.5 A, 7.2 A, 6 A, 6.2 A
  • Cable Size: 12 to 10 AWG
  • Control: Servo Motor Encoder Feedback
  • Cooling: Integrated Fan
  • Country of Origin: ID
  • Enclosure Type: IP20
  • Environmental Conditions: 32 to 122 deg F Temperature deg F
  • Frequency Rating: 50/60 Hz
  • Height: 10.63 in
  • Insulation Type: XLPE/EPR
  • length: 237 mm
  • Material: Copper
  • Phase: 3
  • Stock Status: Scheduled Items
  • UOM: lb
  • Voltage Rating: 208/480 VAC
  • Wattage: 1.8 kW
  • Weight: 5.3300
  • Width: 1.89 in
  • Brand Name: Square D™
  • Manufacturer: Schneider Electric
Schneider Electric LXM32AD18N4 LXM32A CAN RJ45 18A RMS PEAK 3PH 480V,1.89 in (48 mm),10.63 in (270 mm),237 mm,24 V DC for capture-24 V DC for logic-24 V DC for safety,32...122 deg.F (0?50 deg.C) conforming to UL,<= 30 V DC,IP20 conforming to EN/IEC 60529-IP20 conforming to EN/IEC 61800-5-1,Lexium,Lexium 32,UL-T?V-RoHS-CSA,motion servo drive,motion servo drive,terminal cable 3 mm? AWG 12 (CN8)-terminal cable 5 mm? AWG 10 (CN1)-terminal cable 5 mm? AWG 10 (CN10)
QTY
  • Applications
  • Features
For LXM32A integrated fan
200 to 240/380 to 480 VAC rated supply voltage
170 to 264/323 to 528 VAC supply voltage limits
47.5 to 63 Hz network frequency
EMC filter integrated
6 A continuous output current
18 A for 5 s output current 3 s peak
1500/3300 W continuous power
1.2/1.8 kW nominal power
8 kHz switching frequency
Between power and control terminal isolation
0 to 50 deg C ambient air temperature for operation
-25 to 75 deg C ambient air temperature for storage
4.5 A, THDI of 165% at 480 V, 6.2 A, THDI of 159% at 380 V without line choke line current
7.2 A, THDI of 88% at 380 VAC, 6 A, THDI of 98% at 480 VAC with external line choke of 1 mh line current
Motion servo drive, terminal cable 3 mm 12 AWG (cn8)-terminal cable 5 mm 10 AWG (cn1)-terminal cable 5 mm 10 AWG (cn10)
MOTION SERVO DRIVE,TERMINAL CABLE 3 MM? AWG 12 (CN8)-TERMINAL CABLE 5 MM? AWG 10 (CN1)-TERMINAL CABLE 5 MM? AWG 10 (CN10)