Hoffman VHDS36 VM3 VHDS Motion Arm, For Use With HMI Enclosure, 11 to 37 lb Load Capacity, Stainless Steel

Rack/Cabinet Mounting Hardware
530612 MFG #: VHDS36
nVent Hoffman
4596.71000 / ea
  • Application: Controls and Drives; Corrosive Environments
  • Country of Origin: US
  • Dimensions: 10.18 in H x 40.65 in W x 4.86 in D
  • Nema Rating: 4X Watertight, corrosion-resistant
  • Size: 10.18x40.65x4.86 in
  • Standards/Approvals: RoHS CompliantARRA CompliantBuy American Act Compliant
  • Stock Status: Scheduled Items
  • Sub Brand: Syspend
  • UOM: lb
  • Weight: 51.5000
  • Brand Name: nVent HOFFMAN
  • Manufacturer: Hoffman by nVENT
  • Type: Vertical Motion Arms
  • Material: Stainless Steel
Hoffman VHDS Motion Arm, Series: VM3, For Use With: HMI Enclosure, 11 to 37 lb Load Capacity, Stainless Steel, 36 in L
  • Applications
  • Features
For used to provide corrosion resistance and suspends process and control equipment for easy cleaning
Two arm lengths are available with field adjustable counterbalances to support loads up to 125 lb
No release handle is required to operate the arm
Maintains NEMA type 4 and 12 and IEC® IP66 enclosure rating when properly installed per Hoffman instructions
Corrosion resistant stainless steel housing with provisions for water drainage from arm
26 in arm supports loads of 45 to 125 lb with 13 in of vertical height adjustment
Field adjustable gas spring counterbalance allows the user to adjust lifting force by turning an adjustment mechanism under the arm
Angle of gas springs is adjustable (not the pressure), allows lifting force to be increased or decreased at any time for changes in load
Tension adjustment at front of the arm provides additional fine tuning of lifting force
No locking enclosure handle required, enclosure stays in place when repositioned
Easily interfaces with Hoffman HMI enclosures using a 60 x 60 mm enclosure mounting pattern
1-1/4 in internal cable pathway maintains type 4, 4X and 12 enclosure rating and protects wires and cables
Gasketed mounting surfaces at both ends of arm maintain seal integrity
Enclosure and arm can be swiveled 330 deg with swivel stops available in 30 deg increments
Type 304 stainless steel construction, Gas spring counterbalance