Banner Engineering SM312LVAGQD Maxi-Beam® SM312 Photoelectric Sensor, Rectangle Shape, 2 m Sensing, Visible Red Sensing Beam

Photoelectric Sensors
13528 MFG #: SM312LVAGQD
Banner
113.00000 / ea
  • Amperage Rating: 25 mA
  • Connection Type: Quick-Disconnect
  • Country of Origin: USA
  • Enclosure Type: NEMA 1/2/3/3S/4/4X/6/12/IP67
  • Environmental Conditions: 90 Percent at 50 deg C
  • Light Source: LED
  • Operating Temperature: -20 to 70 deg C
  • Output Type: Bi-Polar
  • Response Time: 1 ms
  • Sensing Beam: Visible Red
  • Sensing Method: Retro Reflective
  • Sensing Range: 2 m
  • Series: SM312
  • Shape: Rectangle
  • Size: 73.3 mm L x 12.2 mm W x 33.7 mm H
  • Standards/Approvals: CE Marked, CSA Certified, cULus Listed
  • Stock Status: Normally Stocked
  • UOM: lb
  • Voltage Rating: 10/30 VDC
  • Weight: 1
  • Brand Name: Banner
  • Manufacturer: Banner Engineering
Banner Engineering Maxi-Beam® Photoelectric Sensor, Series: SM312, Rectangle, Retro Reflective Sensing Method, 2 m Sensing Range, Visible Red Sensing Beam, 1 ms Response, Bi-Polar Output, 10/30 VDC, 25 mA, Quick-Disconnect, LED Light Source, 73.3 mm L x 12.2 mm W x 33.7 mm H, NEMA 1/2/3/3S/4/4X/6/12/IP67, -20 to 70 deg C Operating, Environmental Conditions: 90 Percent at 50 deg C
QTY
  • Features
Compact, modulated, self-contained retroreflective sensors
Switch-selectable for light operate or dark operate
Includes Banners exclusive AID™ alignment system, US patent number 4356393
Highly repeatable 1 millisecond response
Rugged, epoxy-encapsulated, totally encapsulated, o-ring sealing, and stainless steel screws construction
Physically and electrically interchangeable with 18 mm barrel-type photoelectric
15-turn slotted brass screw GAIN (sensitivity) adjustment potentiometer (clutched at both ends of travel), both controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cover adjustments
Exclusive, patented alignment indicating device system (AID, US patent no 4356393) lights a rear-panel mounted red LED indicator whenever the sensor sees a light condition, with a superimposed pulse rate proportional to the light signal strength (the stronger the signal, the faster the pulse rate)
Industry standard mounting holes
Both sourcing and sinking outputs (150 mA max. each), continuous overload and short-circuit protected
Protected against false pulse on power-up and continuous overload or short-circuit of outputs
18 mm barrel diameter
Self-contained polarized retroreflective mode photoelectric sensor
Less than 1 uA off-state output leakage, less than 25 mA
Sensors will respond to either a light or dark signal of 1 ms or longer duration, 500 Hz maximum
650 nm visible red LED sensing beam
Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity
4-pin euro-style quick disconnect connection
Reinforced thermoplastic polyester enclosure
Light/dark operate, bipolar (NPN and PNP) output, 150mA maximum each output at 25 deg C, derated to 100 mA at 70 deg C, (PNP output) less than 1 V at 10 mA and less than 2 volts at 150mA, (NPN output) less than 200 mV at 10mA and less than 1 V at 150 mA output saturation voltage
Rectangular with M18 barrel housing style; Supply protection circuitry: Protected against reverse polarity and transient voltages; Output protection circuitry: Protected against false pulse on power-up and continuous overload or short-circuit of outputs