Appleton® Unilets™ LB75-M Type LB Conduit Body, 3/4 in Hub, Form 35, 7 cu-in, Malleable Iron, Triple Coated

Type LB
17607 MFG #: LB75-M
Appleton®
7.74000 / ea
  • Application: For Use With Rigid Steel, Rigid Aluminum Conduit And IMC
  • Connection: Tapered Female Threaded
  • Country of Origin: MX
  • Height: 2.31 in
  • Length: 5.38 in
  • Standard: UL 514A, UL 514B, UL File Number E2527, CSA C22.2 No. 18.3, CSA 065183, NEMA FB-1 in
  • Standards/Approvals: ARRA CompliantRoHS CompliantUL 514B File No. E2527C22.2 No. 18.3/065183 Certified
  • Stock Status: Normally Stocked
  • Sub Brand: UNILETS
  • Type: Type LB Conduit Outlet Body
  • UOM: lb
  • Weight: 1.1800
  • Brand Name: Appleton
  • Manufacturer: Appleton, Division of Emerson
  • Hub Size: 0.75 in
  • Form: 35 in
  • Material: Malleable Iron
  • Finish: Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat)
Form 35™ Unilets™ conduit bodies provide plenty of room for pulling cables and wiring connections. Accurately tapped tapered threads ensure tight, rigid joints and excellent ground continuity.
QTY
  • Applications
  • Features
For Rigid/IMC Conduit
Serve as pulling fittings
Make bends in conduit system
Provide openings for splicing
Connect and change direction of conduit runs
Allow connections for branch runs
Permit access to conductors for maintenance
Smooth, rounded integral bushing in each hub protects conductor insulation
Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity
High tensile strength and ductility, high corrosion resistance, high impact and shock resistance
Sizes with flat-back design ideal where fitting is mounted flat against surface
Stainless steel screw, neoprene or composition fiber gasket
Form 35™ malleable iron unilets high tensile strength and ductility, high corrosion-resistance, high impact and shock resistance
Exclusive built-in easy-pulling rollers in type C (1-1/4 thru 4 in) and type LB (1-1/4 thru 4 in), eliminate damage when cable is pulled through hubs
Access opening back
90 deg hub location
Triple Coat (Zinc Electroplated, Chromate and Epoxy Powder Coated)
Serve as pulling fittings; Make bends in conduit system; Provide openings for splicing; Connect and change direction of conduit runs; Allow connections for branch runs; Permit access to conductors for maintenance; Smooth, rounded integral bushings in hubs protect conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity; High tensile strength and ductility, high corrosion resistance, high impact and shock resistance; Sizes with flat-back design ideal where fitting is mounted flat against surface; Wiring capacity: 7.5 CU-IN as per NEC 314.16(A)